Home Page link

silfos brazing advice

Home| Search | About
Login Password
Register Now! Lost Password?

HVAC Discussions - Heating, ventilation and air conditioning. 

Page 3 of 3       << first < 1 2 3 Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
silfos brazing advice dingus 10-17-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by ~^Johnny^~ on October 19, 2006, 1:41 am
On Wed, 18 Oct 2006 01:13:40 GMT, "Stormin Mormon"

>Flame? As hot as possible. When the copper starts to glow orange,
>that's about the right temp.

What kind of rod do you use to fill the holes? ;->


--
-john
wide-open at throttle dot info

Radiant Heat 468x60
Posted by Power's Mechanical on October 19, 2006, 6:06 pm

~^Johnny^~ wrote:
> On Wed, 18 Oct 2006 01:13:40 GMT, "Stormin Mormon"
>
> >Flame? As hot as possible. When the copper starts to glow orange,
> >that's about the right temp.
>
> What kind of rod do you use to fill the holes? ;->
>
>
> --
> -john
> wide-open at throttle dot info

Machine screws and epoxy. :)


Posted by psdayama on October 22, 2006, 5:15 pm

dingus wrote:
> I am trying to build my own super-efficient refrigerator and i want to
> braze 1/4" tubing between the compressor, water-cooled condenser,
> evaporator, etc. I have had lots of soldering experience and limited
> welding experience.
>
> Is it possible to braze 1/4" copper connections using solely MAPP gas
> and the right torch tip? I have some Silfos 15 brazing rod i can use.
> What temp flame do i need to successfully do this?
>
> Any suggestions? Thanks!

Hi, I hope that you have recd proper advice for brazing.
I am interested in your super-efficient fridge. Let me know when U have
completed and achieved results.
Thanks,
psdayama


Page 3 of 3       << first < 1 2 3
Similar ThreadsPosted
Brazing rod is HOT right now.... February 20, 2007, 8:38 pm
purging lines while brazing? June 17, 2007, 7:41 pm
Low Nitrogen flow while brazing - How to regulate? January 5, 2007, 7:37 pm
I'd like to improve my copper brazing technique. (refrigerant lines) February 5, 2007, 11:05 am
Need some help and advice December 19, 2006, 10:01 pm
Need advice April 25, 2007, 12:54 pm
Re: Advice September 19, 2007, 9:53 pm
Need advice on a new furnace September 15, 2006, 11:31 pm
New Air Conditioner Advice May 4, 2008, 9:41 am
Advice needed August 26, 2008, 12:30 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap