|
Posted by on June 13, 2007, 8:22 pm
> I am looking for a couple of 1hp ge ecm motors that you may have in
> your scrap pile, with or without the "brain". I am curious about this
> motor and would like to get my hands on one to tinker with. I am
> willing to pay for shipping plus a little. Thank you
> byrontalk(at)hotmail.com
I would call local heating and air conditioning companies and see what
they had.... probably result in a better chance of getting one. They
are permanent magnet motors....dc... motors usually dont go bad...but
a lot of folks will change motor and module at the same time.....
Used to see some with windings that just shorted thru vibration.....if
you find one of those and take a look you can probably find the bad
spot....carefully seperate the wires....ohm it out to make sure
everything is ok and take some varnish and recoat the windings where
the insulation has rubbed bare....just slop it on....and you can have
a decent motor for playing with.
yep....local heating and air conditioning companies....probably your
best bet.....
pay some local hvac slug 10.00-20.00 for a motor....cheaper than
shipping it....and if you like fooling around with old electric
equipment you might find a good source for a lot of parts......
old hvac equipment contains a lot of old circuit boards, contactors,
relays...electric switches of various flavors.... its a gold mine for
tinkerers
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap