totaline p274-0200

Posted by Steve on October 21, 2008, 9:05 am

> CJRichards wrote:

>> CJRichards had written this in response to

> Am i doomed to wait on the totaline customer service to email me

>> about this?`

> Your Tech support guy in India is still in training to speak English and
> to read Chinese instruction manuals. Maybe in about 6 months you will get
> support with a Fee attached. I do hope you are good at translating
> sub-bilingual English. That is a Heat pump Thermostat! You don't have a
> Heat pump! Does that maybe give you a clue as to what your problem is?
> All you are doing here is providing entertainment for the troops.

You can lead a horse to water......

Posted by Zyp on October 21, 2008, 11:00 pm

Steve wrote:

>> CJRichards wrote:

>>> CJRichards had written this in response to

>> Am i doomed to wait on the totaline customer service to email me

>>> about this?`

>> Your Tech support guy in India is still in training to speak English
>> and to read Chinese instruction manuals. Maybe in about 6 months you
>> will get support with a Fee attached. I do hope you are good at
>> translating sub-bilingual English. That is a Heat pump Thermostat!
>> You don't have a Heat pump! Does that maybe give you a clue as to
>> what your problem is? All you are doing here is providing
>> entertainment for the troops.

> You can lead a horse to water......

Call a HVACR repair company. That's how they make their living. If your
too cheap to call the right people, then put the thing back in the box and
forget.

--
Zyp

Posted by CJRichards on October 26, 2008, 10:45 pm

CJRichards had written this in response to
http://www.thestuccocompany.com/hvac/Re-totaline-p274-0200-35059-.htm :

All of you guys are ass's except Bipolar Bear. Bipolar Bear thank you for
your assistance. I confirmed what you said with a guy that happened to be
a HVAC guy in the area.
Why do all the rest of you have to be such jerks? All I needed was a
little help with a thermostat. Also I got what I needed from the Totaline
website. The emailed me the install guide in a couple of days after
posting on this website. All of you should be down right ashamed of
yourselves. Just because a guy doesn't have all the proper training like
you got doesn't make him a idiot. My father only got a 10th grade
education and he is the Master Technician for a GM dealership. That
requires knowing ever vehicle GM makes and knowing how to work on every
inch of the vehicle. He gets more training every year from GM to keep him
up to speed on new technology. I bet you bums would scratch your ass and
look befuddled if you had to try and fix some of the cars and trucks he
works on on a daily basis. When he talks to people about their vehicle he
doesn't make fun of them if they said it makes a funny noise and it turns
out to be nothing. He helps the to understand what is going on and how he
will fix it. He is also a handyman on the side. Helping people who can't
afford to have a dumbass "professional" tradesman like you come out. I
will admit not all are dumbasses but its hard to find one who isn't. And
all his clients have been pleased with the work he does. Who do you think
taught me what I know?

Thank you again Bipolor Bear for your assistance and the rest of you can
go to hell. I will never ask for help again from any of you unless I want
some amusement from all of your dumbass comments.

##-----------------------------------------------##
Delivered via http://www.thestuccocompany.com/
Building Construction and Maintenance Forum
Web and RSS access to your favorite newsgroup -
alt.hvac - 26458 messages and counting!
##-----------------------------------------------##

Posted by on October 27, 2008, 12:47 am

On 27 Oct 2008 02:45:24 GMT, haloboy84_at_yahoo_dot_com@foo.com
(CJRichards) wrote:

>CJRichards had written this in response to
>http://www.thestuccocompany.com/hvac/Re-totaline-p274-0200-35059-.htm :
> My father only got a 10th grade
>education and he is the Master Technician for a GM dealership.

LMAO!!! That would explain why I had to find the service bulletin and
show it to the dumbasses after the 4th time for the same damn problem.

Posted by Stormin Mormon on October 27, 2008, 10:28 am

Anyone noticed how people want all kinds of stuff for free? Disrespecting
the guys who get training, and invest time and money so we can serve you.

--
Christopher A. Young
Learn more about Jesus
www.lds.org
.

All of you guys are ass's except Bipolar Bear. Bipolar Bear thank you for
your assistance. I confirmed what you said with a guy that happened to be
a HVAC guy in the area.
Why do all the rest of you have to be such jerks? All I needed was a
little help with a thermostat. Also I got what I needed from the Totaline
website. The emailed me the install guide in a couple of days after
posting on this website. All of you should be down right ashamed of
yourselves. Just because a guy doesn't have all the proper training like
you got doesn't make him a idiot. My father only got a 10th grade
education and he is the Master Technician for a GM dealership. That
requires knowing ever vehicle GM makes and knowing how to work on every
inch of the vehicle. He gets more training every year from GM to keep him
up to speed on new technology. I bet you bums would scratch your ass and
look befuddled if you had to try and fix some of the cars and trucks he
works on on a daily basis. When he talks to people about their vehicle he
doesn't make fun of them if they said it makes a funny noise and it turns
out to be nothing. He helps the to understand what is going on and how he
will fix it. He is also a handyman on the side. Helping people who can't
afford to have a dumbass "professional" tradesman like you come out. I
will admit not all are dumbasses but its hard to find one who isn't. And
all his clients have been pleased with the work he does. Who do you think
taught me what I know?

Thank you again Bipolor Bear for your assistance and the rest of you can
go to hell. I will never ask for help again from any of you unless I want
some amusement from all of your dumbass comments.

Page 3 of 3 << first < 1 2 3

Similar Threads	Posted
Totaline P274-0200 Wiring Question	January 21, 2007, 2:59 pm

totaline p274-0200 - Page 3