|
Posted by Grandpa on April 12, 2007, 8:20 pm
hallerb@aol.com wrote:
>> Greetings,
>>
>> Today I looked at a house and when I asked about the 1/2" pipe on 3/4"
>> water heater temp / pressure relief valve. �I was told that it wasn't
>> a problem since a 1/2" cold water pipe was adapted onto the 3/4"
>> entrance to the water heater. �Is this true? �If not can you site
>> anything which says this is not OK?
>>
>> Thanks!
>
> functionallyt it likely doesnt matter, but code requires the line not
> be downsized............
>
Its really going to depend upon the prevailing code. Where my son
lives, its a requirement that it not be restricted; where I live (12
miles away), its not listed in the code. He needs a drain pan under
the heater, I don't (but there's one there anyway).
--
Grandpa
|