Home Page link

5 gang mud ring for 1/2" depth

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 2 of 2       << first < 1 2 Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
5 gang mud ring for 1/2" depth nmbexcuse 04-09-2008
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Terry on April 9, 2008, 11:51 pm
wrote:

>
>>
>>> Is there an online source for mud rings? I need a 5 gang mud ring for
>>> the standard 5 gang metal box (not the stacked gangable kind) but went
>>> to three electrical supply houses locally and all they had were 3/4"
>>> depth and they can't even special order it, says it does not EXIST!
>>>
>>> I know they exist.
>>>
>>> I searched the web and came up empty.
>>>
>>> Thanks,
>>>
>>> MC
>>
>> Can you mount the box 1/4" back?
>>
>Not easy to do at this point, the box has been mounted with many pipes going
>in, I would have to adjust over a dozen 1/2 and 3/4 EMT pipes to just shift
>the box. I have two five gang boxes.
>
We always use 5/8 rings for 1/2 rock.

The never run out of ways to try to confuse us, but 5/8 is the size
ring that will be flush if the box is under half inch rock.

I never tried to buy a 5 gang.

PexSupply PEX Tools 468x60
Posted by KJS on April 9, 2008, 9:31 pm
On Wed, 9 Apr 2008 14:29:51 -0700, nmbexcuse@hotmail.com wrote
(in article

> Is there an online source for mud rings? I need a 5 gang mud ring for
> the standard 5 gang metal box (not the stacked gangable kind) but went
> to three electrical supply houses locally and all they had were 3/4"
> depth and they can't even special order it, says it does not EXIST!
>
> I know they exist.
>
> I searched the web and came up empty.
>
> Thanks,
>
> MC


Garvin Industries makes them. Their catalog number is GBDC-125. You can buy
them at www.electrical-supply.net

Here is the link to the catalog page.

http://www.electrical-
supply.net/product.asp_Q_parentID_E_501_A_subCatID_E_515_A_prodID_E_2426

Only problem is they have a $25 minimum and the raised cover is $8.55, but
perhaps there's some other stuff you need...





Posted by MiamiCuse on April 10, 2008, 12:06 am

> On Wed, 9 Apr 2008 14:29:51 -0700, nmbexcuse@hotmail.com wrote
> (in article
>
>> Is there an online source for mud rings? I need a 5 gang mud ring for
>> the standard 5 gang metal box (not the stacked gangable kind) but went
>> to three electrical supply houses locally and all they had were 3/4"
>> depth and they can't even special order it, says it does not EXIST!
>>
>> I know they exist.
>>
>> I searched the web and came up empty.
>>
>> Thanks,
>>
>> MC
>
>
> Garvin Industries makes them. Their catalog number is GBDC-125. You can
> buy
> them at www.electrical-supply.net
>
> Here is the link to the catalog page.
>
> http://www.electrical-
> supply.net/product.asp_Q_parentID_E_501_A_subCatID_E_515_A_prodID_E_2426
>
> Only problem is they have a $25 minimum and the raised cover is $8.55, but
> perhaps there's some other stuff you need...
>
>
THANK YOU!!!!!

This is exactly what I need, even if they charge $25 it's well worth it
compared to the labor cost to reseat the boxes. I ordered already - much
appreciated.

MC



Page 2 of 2       << first < 1 2
Similar ThreadsPosted
3 device mud ring for a 5 gang box April 28, 2008, 11:22 pm
supporting a new tile floor- plywood depth, backer board depth? July 2, 2005, 12:12 pm
Gang switches December 13, 2005, 2:01 am
Two gang cirquit breakers. September 3, 2005, 8:19 am
oversize GFI 2-gang outlet - available? December 13, 2006, 5:06 pm
Adding a switch (extending) two-gang box August 20, 2005, 6:14 am
single gang double 3-way switch May 26, 2006, 8:07 pm
Max No. Of Wires Allowed Per Code For A 4" x 2" Elect. Switch/Gang Box ? August 18, 2005, 3:33 pm
Help wiring switched double gang receptacle at end of circuit September 5, 2006, 9:55 am
There is no single toggle switch plate for a double gang box? November 18, 2007, 10:44 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap