If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by Martik on March 18, 2006, 12:12 am
http://128.121.47.106/ia/home_improvement/home_sealing/DIY_COLOR_100_dpi.pdf Why does step 3 on page 8 require sealing the soffit cavity? If the exposed
stud walls are sealed, why not just fill the dropped soffit with cellulose
or other installation, assuming all electrical and other penetrations are
sealed? There are no recessed lights in my application.
|
|
Posted by Joseph Meehan on March 18, 2006, 6:20 am
Martik wrote:
show/hide quoted text
> http://128.121.47.106/ia/home_improvement/home_sealing/DIY_COLOR_100_dpi.pdf
> Why does step 3 on page 8 require sealing the soffit cavity? If the
> exposed stud walls are sealed, why not just fill the dropped soffit
> with cellulose or other installation, assuming all electrical and
> other penetrations are sealed? There are no recessed lights in my
> application.
I would assume to reduce drafts and to avoid having the loose fill
insulation from going through.
--
Joseph Meehan
Dia duit
|
|
Posted by tbasc@bellsouth.net on March 18, 2006, 7:22 am
International Residential Code 2003, Paragraph 602.8 says in part:
Fire blocking shall be provided to cut off all concealed draft openings
(both vertical and horizontal) and to form an effective fire barrier
between stories, and between a top story and a roof space. Fire
blocking shall be provided ... at all interconnections between
concealed vertical spaces such as occur in soffits...
As a practical matter, closing at the ceiling plane produces fewer and
more easily accessible joints to seal. It completes the kitchen
enclosure in a simple and regular way that allows changes later.
Congratulations for working toward an energy efficient house. It would
be interesting to compare next year's energy bill with last year's.
|
|
Posted by Martik on March 18, 2006, 2:24 pm
show/hide quoted text
> International Residential Code 2003, Paragraph 602.8 says in part:
> Fire blocking shall be provided to cut off all concealed draft openings
> (both vertical and horizontal) and to form an effective fire barrier
> between stories, and between a top story and a roof space. Fire
> blocking shall be provided ... at all interconnections between
> concealed vertical spaces such as occur in soffits...
> As a practical matter, closing at the ceiling plane produces fewer and
> more easily accessible joints to seal. It completes the kitchen
> enclosure in a simple and regular way that allows changes later.
> Congratulations for working toward an energy efficient house. It would
> be interesting to compare next year's energy bill with last year's.
> TB
Thanks, it's amazing how much can be saved. According to this model, my
home's energy requirements will be reduced by approx 70%.
http://www.buildingsgroup.nrcan.gc.ca/software/hot2xp_e.html Retrofits include, new windows/doors, insulation upgrades, air sealing
|
| Similar Threads | Posted | | Re: Roof Soffits Question: Insulation getting over Soffit Holes In Attic - How To Prevent | March 14, 2007, 2:40 pm |
| Finishing an attic that has no soffit vents? | July 31, 2005, 7:44 pm |
| Attic-fan (PAV) suggestions - unvented soffit | June 20, 2005, 4:51 pm |
| Attic insulation: do attic floor, or roof, or what? And, how much work (ie $$$)? | January 20, 2009, 2:59 pm |
| No soffit vents, no roof or ridge vents. How do I finish my attic?? | December 30, 2005, 1:02 am |
| ATTIC INSULATION | September 3, 2005, 7:12 am |
| attic insulation | October 5, 2005, 5:59 pm |
| OK, now about attic insulation... | February 13, 2006, 8:03 pm |
| attic insulation | March 16, 2006, 10:27 am |
| Attic insulation | July 12, 2006, 11:08 pm |
|
|
> Why does step 3 on page 8 require sealing the soffit cavity? If the
> exposed stud walls are sealed, why not just fill the dropped soffit
> with cellulose or other installation, assuming all electrical and
> other penetrations are sealed? There are no recessed lights in my
> application.