|
Posted by Dan on May 24, 2007, 1:39 pm
I recently bought a house with a pre-installed ADT system. System was
installed in 2000. User manual says it is either a VIA-30PSE or a
Vista-10SE. I believe it is the latter. It has a single 6127/6128 keypad
in the house. The semi-detached garage has a motion detector. I would like
to add another keypad to the garage, since getting into/out of the
car/pulling in/pulling out/opening/shutting the garage door before the
entry/exit delay is proving to be a bit of a push. 6128 keypads are
available used on Ebay. Right now, I have that zone bypassed, but this is a
pain, not only because I WANT protection out there, but also because
(apparently) you have to BYPASS the zone EACH TIME re re-activate the
system. I've run all kinds of wiring & am not concerned with the technical
aspects of installing the keypad, but I'm wondering what keypad to get.
Also, all I have is the fairly useless from a technical standpoint user
manual. Is there any technical info online, as to how & where to connect a
2nd pad to the system?
Thanks
Dan
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap