Home Page link

Attaching sheet rock

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 2 of 3       < 1 2 3 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Attaching sheet rock MiamiCuse 07-29-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by MiamiCuse on July 29, 2007, 10:30 pm

>
>> When you attach sheet rock do you attach it horizontally or vertically?
>> The floor to ceiling height is 8', and wall studs are spaced 16" OC, so
>> it would work either way, just curious if I should them horizontally (one
>> on top, one at bottom) or vertically?
>>
>> I am leaning to installing them vertically simply because it is easier
>> for one person to handle, and any uneven-ness on the ceiling is probably
>> easier to deal with for a 4' width at a time. Does this make sense?
>
>
> No. It can be easy for one person to do horizontal with the right setup.
> You slide the sheet up to the ceiling and wedge it in place. One you get
> just a couple or screws, it will stay. You cut the bottom sheet with a
> tiny bit of clearance to the floor to take up any unevenness. There is a
> foot bracket that you can use to held it in place while putting screws in.
>
> Now you have along seam to tape at a comfortable height, the high and low
> seams are only half or a third (if you use 12" sheets)
>
That seems to be what everyone is saying so I probably will go with
horizontal hanging although I think by myself getting it up and stay put
with my right hand while I put a few screws in would be a chanllenge.

>
>>
>> Code calls for a screw every 8" so I would do that along the edges.
>> However, what about the two studs in the middle? Do you put screws every
>> 8" from top to bottom along those studs too, seems like an overkill, or
>> may be not?
>
> The code says every 8" right? They mean every 8". When they change to
> code to read "every 8" on the edges and put what you think looks right in
> the center" you may use less.
>
Alright then that's what I would do.

MC




Posted by Eigenvector on July 29, 2007, 11:11 pm

>
>>
>>> When you attach sheet rock do you attach it horizontally or vertically?
>>> The floor to ceiling height is 8', and wall studs are spaced 16" OC, so
>>> it would work either way, just curious if I should them horizontally
>>> (one on top, one at bottom) or vertically?
>>>
>>> I am leaning to installing them vertically simply because it is easier
>>> for one person to handle, and any uneven-ness on the ceiling is probably
>>> easier to deal with for a 4' width at a time. Does this make sense?
>>
>>
>> No. It can be easy for one person to do horizontal with the right setup.
>> You slide the sheet up to the ceiling and wedge it in place. One you get
>> just a couple or screws, it will stay. You cut the bottom sheet with a
>> tiny bit of clearance to the floor to take up any unevenness. There is a
>> foot bracket that you can use to held it in place while putting screws
>> in.
>>
>> Now you have along seam to tape at a comfortable height, the high and low
>> seams are only half or a third (if you use 12" sheets)
>>
> That seems to be what everyone is saying so I probably will go with
> horizontal hanging although I think by myself getting it up and stay put
> with my right hand while I put a few screws in would be a chanllenge.
>
>>

Watch yourself when you do that, hanging drywall by myself was exactly how I
developed tennis elbow - it ain't a fun ailment to have and it lasts and
lasts. Get help if you can, if not, take it slow and remember to use the
studs in the wall as friction helpers in keeping the wallboard up in
position. Electrical boxes can be your friend too, they provide the
necessary structure to take the load off your arms.

>>>
>>> Code calls for a screw every 8" so I would do that along the edges.
>>> However, what about the two studs in the middle? Do you put screws
>>> every 8" from top to bottom along those studs too, seems like an
>>> overkill, or may be not?
>>
>> The code says every 8" right? They mean every 8". When they change to
>> code to read "every 8" on the edges and put what you think looks right in
>> the center" you may use less.
>>
> Alright then that's what I would do.
>
> MC
>
>
>



Posted by MiamiCuse on July 30, 2007, 10:54 pm

>
>>
>>>
>>>> When you attach sheet rock do you attach it horizontally or vertically?
>>>> The floor to ceiling height is 8', and wall studs are spaced 16" OC, so
>>>> it would work either way, just curious if I should them horizontally
>>>> (one on top, one at bottom) or vertically?
>>>>
>>>> I am leaning to installing them vertically simply because it is easier
>>>> for one person to handle, and any uneven-ness on the ceiling is
>>>> probably easier to deal with for a 4' width at a time. Does this make
>>>> sense?
>>>
>>>
>>> No. It can be easy for one person to do horizontal with the right
>>> setup. You slide the sheet up to the ceiling and wedge it in place. One
>>> you get just a couple or screws, it will stay. You cut the bottom sheet
>>> with a tiny bit of clearance to the floor to take up any unevenness.
>>> There is a foot bracket that you can use to held it in place while
>>> putting screws in.
>>>
>>> Now you have along seam to tape at a comfortable height, the high and
>>> low seams are only half or a third (if you use 12" sheets)
>>>
>> That seems to be what everyone is saying so I probably will go with
>> horizontal hanging although I think by myself getting it up and stay put
>> with my right hand while I put a few screws in would be a chanllenge.
>>
>>>
>
> Watch yourself when you do that, hanging drywall by myself was exactly how
> I developed tennis elbow - it ain't a fun ailment to have and it lasts and
> lasts. Get help if you can, if not, take it slow and remember to use the
> studs in the wall as friction helpers in keeping the wallboard up in
> position. Electrical boxes can be your friend too, they provide the
> necessary structure to take the load off your arms.
>

Thanks for the advise!

MC



Posted by dadiOH on July 30, 2007, 7:49 am
MiamiCuse wrote:
>> Now you have along seam to tape at a comfortable height, the high
>> and low seams are only half or a third (if you use 12" sheets)
>>
> That seems to be what everyone is saying so I probably will go with
> horizontal hanging although I think by myself getting it up and
> stay put with my right hand while I put a few screws in would be a
> chanllenge.

If I were going to do that I'd temporarily nail on a 2x4 ledger as a
rest for the DW, put a small piece of ply twixt the two (after the DW
was resting) and use it as a jack/lever to lift. That's assuming you
are hanging the top piece first.


--

dadiOH
____________________________

dadiOH's dandies v3.06...
...a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico




Posted by Tim Mulvey on August 1, 2007, 2:20 pm

>
>>
>>> When you attach sheet rock do you attach it horizontally or vertically?
>>> The floor to ceiling height is 8', and wall studs are spaced 16" OC, so
>>> it would work either way, just curious if I should them horizontally
>>> (one on top, one at bottom) or vertically?
>>>
>>> I am leaning to installing them vertically simply because it is easier
>>> for one person to handle, and any uneven-ness on the ceiling is probably
>>> easier to deal with for a 4' width at a time. Does this make sense?
>>
>>
>> No. It can be easy for one person to do horizontal with the right setup.
>> You slide the sheet up to the ceiling and wedge it in place. One you get
>> just a couple or screws, it will stay. You cut the bottom sheet with a
>> tiny bit of clearance to the floor to take up any unevenness. There is a
>> foot bracket that you can use to held it in place while putting screws
>> in.
>>
>> Now you have along seam to tape at a comfortable height, the high and low
>> seams are only half or a third (if you use 12" sheets)
>>
> That seems to be what everyone is saying so I probably will go with
> horizontal hanging although I think by myself getting it up and stay put
> with my right hand while I put a few screws in would be a chanllenge.

Just lean the sheet against the wall where it goes, start a drywall nail at
every stud about 2" or 3" down from top of sheet, raise it up, and hammer
away. Then you can screw it off.

Tim


>
>>
>>>
>>> Code calls for a screw every 8" so I would do that along the edges.
>>> However, what about the two studs in the middle? Do you put screws
>>> every 8" from top to bottom along those studs too, seems like an
>>> overkill, or may be not?
>>
>> The code says every 8" right? They mean every 8". When they change to
>> code to read "every 8" on the edges and put what you think looks right in
>> the center" you may use less.
>>
> Alright then that's what I would do.
>
> MC
>
>
>



Page 2 of 3       < 1 2 3 > last >>
Similar ThreadsPosted
Re: Attaching sheet rock July 30, 2007, 3:47 am
Sheet rock April 18, 2006, 8:55 pm
Sheet rock repair November 2, 2005, 10:12 am
Repairing sheet-rock July 25, 2007, 1:46 pm
Sheet Rock Screws April 29, 2008, 11:06 am
bullet resistant sheet rock July 1, 2007, 12:25 am
Stapling romex to sheet rock? January 13, 2006, 3:21 pm
Best way to repair cracking sheet rock?? February 2, 2006, 1:40 pm
Laminate Backsplash over sheet rock June 19, 2006, 1:44 pm
How to fasten ceiling sheet rock? September 23, 2007, 8:23 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap