If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by A. H. G. on April 23, 2008, 2:05 pm
>
>
> I have not yet purchased a battery for it. I just looked for one on
> the web. I found:
>
>
http://www.acehardwareoutlet.com/(ig3azrazweppyo55opnpwy55)/LargeImage.aspx?SKU=296040001&Image=296040001h.JPG&height=121
>
> It appears that the battery is sealed, but I am not certain. The
> instructions do not include much in the way of battery maintenance.
>
>
Thank you Joseph.
Received reply from ACE Hardware. They do not have this battery in stock, if
ever.
|
|
Posted by Rich Greenberg on April 23, 2008, 11:56 am
[...]
>Also, I am unable to unscrew to remove to sharpen the blade.
>Can you tell me I should turn the nut counter-clockwise to unscrew, correct?
It may be a left hand thread. Try both ways. Do you have an owners
manual? It should say if so.
--
Rich Greenberg N Ft Myers, FL, USA richgr atsign panix.com + 1 239 543 1353
Eastern time. N6LRT I speak for myself & my dogs only. VM'er since CP-67
Canines:Val, Red, Shasta & Casey (RIP), Red & Zero, Siberians Owner:Chinook-L
Retired at the beach Asst Owner:Sibernet-L
|
|
Posted by A. H. G. on April 23, 2008, 2:05 pm
>
> [...]
>
>>Also, I am unable to unscrew to remove to sharpen the blade.
>>Can you tell me I should turn the nut counter-clockwise to unscrew,
>>correct?
>
> It may be a left hand thread. Try both ways. Do you have an owners
> manual? It should say if so.
>
>
Rich, I got no owner's manual for this lawn mower anymore, after several
moves. Can anyone out there help which way to turn to remove the blade?
Also, any good way to identify my weak mower (with frequency stalls at high
grasses, but wait a few minutes and can restart) is problem of battery or
motor?
Thank you.
|
|
Posted by Rich Greenberg on April 23, 2008, 4:30 pm
[...]
>Rich, I got no owner's manual for this lawn mower anymore, after several
>moves. Can anyone out there help which way to turn to remove the blade?
Try it both ways.
>Also, any good way to identify my weak mower (with frequency stalls at high
>grasses, but wait a few minutes and can restart) is problem of battery or
>motor?
Could be battery, could be motor overheating. Have you lubricated the
motor bearings? Look on the manufacturer's web site. You may be able
to d/l the manual or call tech support.
Can you run it with a voltmeter on the battery? See if the stalls show
the voltage dipping.
--
Rich Greenberg N Ft Myers, FL, USA richgr atsign panix.com + 1 239 543 1353
Eastern time. N6LRT I speak for myself & my dogs only. VM'er since CP-67
Canines:Val, Red, Shasta & Casey (RIP), Red & Zero, Siberians Owner:Chinook-L
Retired at the beach Asst Owner:Sibernet-L
|
|
Posted by Joseph Meehan on April 23, 2008, 6:17 pm
>
> Rich, I got no owner's manual for this lawn mower anymore, after several
> moves. Can anyone out there help which way to turn to remove the blade?
>
> Also, any good way to identify my weak mower (with frequency stalls at
> high grasses, but wait a few minutes and can restart) is problem of
> battery or motor?
>
> Thank you.
I seem to recall a motor rebuild kit that replaces brushes and a few
other parts.
--
Joseph Meehan
Dia 's Muire duit
|
Page 2 of 4 < 1 2 3 > last >>
| Similar Threads | Posted | | where to buy DC motor brushings for Black & Decker CMM1000 lawn mower? | April 27, 2008, 9:54 pm |
| Black & Decker | April 3, 2008, 8:01 am |
| Black & Decker Navigator Saw | May 20, 2006, 5:15 am |
| Where to get Black & Decker Parts | April 2, 2007, 1:50 am |
| black & decker blender turns itself on!? | July 26, 2006, 9:29 pm |
| Black & Decker charger repair | August 9, 2006, 6:08 pm |
| Black and Decker Garage Cabinets | November 22, 2006, 7:04 am |
| Heating element for Black&Decker | April 1, 2007, 5:28 pm |
| how do I get my 13amp Black & Decker circular saw to work? | May 19, 2007, 10:23 am |
| Black and Decker 18 volt drill runs backwards??? | March 26, 2006, 2:21 am |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap