Home Page link

Black and Decker Garage Cabinets

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Black and Decker Garage Cabinets Jim Jacobs 11-22-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Jim Jacobs on November 22, 2006, 7:04 am


If anyone has any experience with the new Blacker and Decker wall cabinets
could you please share. I saw them at Lowes the other day but they do not
show up on the B&D website so I am assuming they are a relatively new
product.

Jim



Posted by professorpaul on November 22, 2006, 12:08 pm


I got 3 of the floor ones -- about 5' high, shipped knocked down, at
Lowes. About $75 each.

1. They don't rust -- I'm near the Atlantic ocean in DE. Painted steel
would be out of the question.

2. It occasionally took a tap with a rubber mallet to coax them
together. Had to use a utility knife in a couple of places to get the
"flash" off of the plastic pieces.

3. They look great! Clean up with windex, or the liek.

4. I need to shore up the shelves, as they do seem to sag under
excessive weight, like cans of paint. I'll move them to the bottom.

5. I did not bolt them to the wall, but their are provisions to do so.
I need to be able to easily move them on occasion.

6. They need to be level (a little shimming with cardboard), or they
don't close right. No surprise here.

Overall, I'm quite satisfied. The wall mount ones might be a little
different.


Similar ThreadsPosted
Black & Decker April 3, 2008, 8:01 am
Black & Decker Navigator Saw May 20, 2006, 5:15 am
Where to get Black & Decker Parts April 2, 2007, 1:50 am
black & decker blender turns itself on!? July 26, 2006, 9:29 pm
Black & Decker charger repair August 9, 2006, 6:08 pm
Heating element for Black&Decker April 1, 2007, 5:28 pm
how do I get my 13amp Black & Decker circular saw to work? May 19, 2007, 10:23 am
Black and Decker 18 volt drill runs backwards??? March 26, 2006, 2:21 am
Dangerous trimmer/edger? Black & Decker GH1000 Grass Hog XP September 26, 2006, 11:47 pm
Need source for parts to repair Black and Decker under counter can opener April 17, 2007, 12:04 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap