|
Home Repair - - If it ain't broken, don't fix it. Otherwise look here.
|
|
|
|
If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by Existential Angst on October 26, 2009, 9:38 am
Awl --
I know that the NEC code (and NYC code) specifies that a "standard" wall
outlet can't be below X inches above the floor -- 4" (at one time), iirc.
Is there a similar code for breaker panels? And is there a *maximum* height
above the floor, as well?
Curious as to what the various codes are in various locales, esp. in
NYC/Westchester.
--
EA
|
|
Posted by Existential Angst on October 26, 2009, 10:14 am
> Awl --
> I know that the NEC code (and NYC code) specifies that a "standard" wall
> outlet can't be below X inches above the floor -- 4" (at one time), iirc.
> Is there a similar code for breaker panels? And is there a *maximum*
> height above the floor, as well?
> Curious as to what the various codes are in various locales, esp. in
> NYC/Westchester.
Heh, google is yer friend.
"height for breaker panels" returned a surprising number of forums
addressing this very question, which I hadn't expected.
Apparently the general answser is, No minimum height, but a 6'7" max height
to the top breaker, which, if higher, must have a permanent step, etc. to
reach it. Sorta surprising, no min. height (unless in a mobile home, then
it's 24").
Also inneresting is that NYC has greatly relaxed its code, by adopting the
much more lenient NEC.
For example, at one time, the max #12 wires in 1" emt was 8 or 9 in the 70s,
now it's almost 20, iirc. Big effing diff.
--
EA
> --
> EA
>
|
|
Posted by rlz on October 26, 2009, 12:51 pm
wrote:
> > Awl --
> > I know that the NEC code (and NYC code) specifies that a "standard" wal=
l
> > outlet can't be below X inches above the floor -- 4" (at one time), iir=
c.
> > Is there a similar code for breaker panels? =A0And is there a *maximum*
> > height above the floor, as well?
> > Curious as to what the various codes are in various locales, esp. in
> > NYC/Westchester.
> Heh, google is yer friend.
> "height for breaker panels" returned a surprising number of forums
> addressing this very question, which I hadn't expected.
> Apparently the general answser is, No minimum height, but a 6'7" max heig=
ht
> to the top breaker, which, if higher, must have a permanent step, etc. to
> reach it. =A0Sorta surprising, no min. height (unless in a mobile home, t=
hen
> it's 24").
> Also inneresting is that NYC has greatly relaxed its code, by adopting th=
e
> much more lenient NEC.
> For example, at one time, the max #12 wires in 1" emt was 8 or 9 in the 7=
0s,
> now it's almost 20, iirc. =A0Big effing diff.
> --
> EA
> > --
> > EA- Hide quoted text -
> - Show quoted text -
I recently installed an auxillary electrical panel, and the city
inspector here in Denver said that there was no minimum height, just
that the bottom of the panel couldn't be above 6' tall.
|
|
Posted by Mark on October 26, 2009, 12:54 pm
> Awl --
> I know that the NEC code (and NYC code) specifies that a "standard" wall
> outlet can't be below X inches above the floor -- 4" (at one time), iirc.
> Is there a similar code for breaker panels? And is there a *maximum*
> height above the floor, as well?
> Curious as to what the various codes are in various locales, esp. in
> NYC/Westchester.
> --
> EA
Never realized there was a minimum height for outlets. I've seen them on
the baseboard in relatively new homes, and of course there are floor mounted
models, which I assume require the special outlet for protection.
|
|
Posted by on October 26, 2009, 2:56 pm
>> Awl --
>> I know that the NEC code (and NYC code) specifies that a "standard" wall
>> outlet can't be below X inches above the floor -- 4" (at one time), iirc.
>> Is there a similar code for breaker panels? And is there a *maximum*
>> height above the floor, as well?
>> Curious as to what the various codes are in various locales, esp. in
>> NYC/Westchester.
>> --
>> EA
>Never realized there was a minimum height for outlets. I've seen them on
>the baseboard in relatively new homes, and of course there are floor mounted
>models, which I assume require the special outlet for protection.
That may be a NYC code but it certainly isn't a NEC rule.
|
Page 1 of 3 1 2 3 > last >>
| Similar Threads | Posted | | Extending a Breaker Panel. | September 9, 2005, 12:58 pm |
| Breaker Panel....Neutral bus | March 11, 2006, 8:03 pm |
| Found something odd in my breaker panel | October 5, 2006, 4:59 pm |
| 200 amp main panel with 100 amp breaker | May 27, 2008, 8:39 am |
| Breaker panel questions | May 19, 2009, 8:49 pm |
| Half of breaker panel hot, the other dead!?! | September 22, 2006, 11:28 pm |
| Circuit breaker panel question | December 12, 2006, 5:21 pm |
| Circuit Breaker Panel Question | December 12, 2007, 12:14 pm |
| Breaker Panel 220V problem | January 6, 2008, 3:38 pm |
| 30A breaker feeding a 100A sub-panel? | February 27, 2008, 4:32 pm |
|
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap
> I know that the NEC code (and NYC code) specifies that a "standard" wall
> outlet can't be below X inches above the floor -- 4" (at one time), iirc.
> Is there a similar code for breaker panels? And is there a *maximum*
> height above the floor, as well?
> Curious as to what the various codes are in various locales, esp. in
> NYC/Westchester.