Home Page link

Briggs & Stratton Engine question.

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Briggs & Stratton Engine question. 2ndKnight 09-21-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by 2ndKnight on September 21, 2006, 3:07 pm
I need to replace the 6.5 hp engine on a fairly new Sears mower and
have found relatively inexpensive sources for engines on the Internet
but I need to know the engine model number. Does anyone happen to know
where one would begin to look for the model number? That is, would it
be on the engine itself or need I hunt down a manual or contact Sears?


Posted by Charlie Morgan on September 21, 2006, 3:14 pm
wrote:

>I need to replace the 6.5 hp engine on a fairly new Sears mower and
>have found relatively inexpensive sources for engines on the Internet
>but I need to know the engine model number. Does anyone happen to know
>where one would begin to look for the model number? That is, would it
>be on the engine itself or need I hunt down a manual or contact Sears?

go to

briggsandstratton.com

They have drawings of various engine models and arrows pointing to
where the model, type, and code numbers are located. It's best to have
all three numbers when trying to make sure you are looking at the
exact right engine when ordering parts.

CWM

Posted by George on September 21, 2006, 3:30 pm

2ndKnight wrote:
> I need to replace the 6.5 hp engine on a fairly new Sears mower and
> have found relatively inexpensive sources for engines on the Internet
> but I need to know the engine model number. Does anyone happen to know
> where one would begin to look for the model number? That is, would it
> be on the engine itself or need I hunt down a manual or contact Sears?

This link should help

http://www.briggsandstratton.com/display/router.asp?DocID=81275


Posted by nanook on September 21, 2006, 6:36 pm
wrote:

>I need to replace the 6.5 hp engine on a fairly new Sears mower and
>have found relatively inexpensive sources for engines on the Internet
>but I need to know the engine model number. Does anyone happen to know
>where one would begin to look for the model number? That is, would it
>be on the engine itself or need I hunt down a manual or contact Sears?


when I replaced my engine on my push mower, all I did was make sure
the bolt patterns were the same. I even upgraded my engine from a 5
to a 6.5.

now the mounting bolts holes are not threaded, so be prepared to use
some muscle when cutting the new threads with the original bolts.

try www.jackssmallengines.com good service and good prices, that's
where I got my new 6.5 HP B&S.

Similar ThreadsPosted
briggs & stratton engine June 13, 2007, 4:23 pm
Briggs & Stratton Engine Problem April 16, 2008, 10:30 pm
WAS: Briggs & Stratton Engine Problem May 2, 2008, 12:37 pm
Go-Kart engine problems (Briggs and Stratton) July 7, 2006, 9:45 pm
Re: old briggs and stratton engine model number March 28, 2007, 9:06 am
FINAL WAS: Briggs & Stratton Engine Problem May 20, 2008, 4:45 am
Briggs & Stratton 16 HP engine-points actuating rod not moving enough ? November 5, 2005, 7:31 pm
Re: 12.5 HP Briggs and Stratton Engine on Sanapper Riding Mower May 7, 2006, 9:12 pm
19.5HP Briggs & Stratton - Yardman Mower Engine Problems June 15, 2007, 9:24 am
Briggs & Stratton 3.5hp Engine Will Not Start with Air Filter Bolt Installed June 10, 2007, 5:13 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap