If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by Barry on April 24, 2006, 9:33 pm
I myself was thinking of using the system I see in restaurants. I
don't know what it is called, but it is almost like 2x4x8 length
material that snaps into some sort of track. Anyone familiar with this
product?
|
 
| |
Posted by hallerb@aol.com on April 24, 2006, 9:53 pm
I had some lower ducts, put the suspended cieling as high as possible
and let the ducts painted brite whilte hang below the suspended cieling
where necessary.
way better than using the lowest duct as the highest cieling point. it
is after all a finished basement
|
|
Posted by WConner on April 25, 2006, 9:36 pm
I made strips 1/2" thick, rough saw on face, planed on back about 2-3/4"
wide, nailed them on bottom of floor joists with finish nails, planed side
to joist, cut 1/2" drywall to fit between and lay on top of strips. Ones
with tight access, under heat duct for instance, I fastened with screws as
there was not enough room to raise panel and tip it to come out. A person I
told about this cut acoustic panels to go between, I may have pict. and
message from that person.
Walt Conner
|
Page 3 of 3 << first < 1 2 3
| Similar Threads | Posted | | Headroom too low for new garage door? | March 29, 2006, 9:34 pm |
| Basement ceiling. | October 9, 2005, 10:28 am |
| Drywall Ceiling In Basement | February 5, 2006, 2:18 pm |
| insulating basement ceiling | February 21, 2007, 5:31 am |
| Basement ceiling woes | February 26, 2007, 4:17 pm |
| Basement ceiling ideas | September 29, 2007, 7:17 am |
| Drywall ceiling - basement | January 21, 2008, 12:11 pm |
| Finishing a basement ceiling | March 26, 2008, 3:47 pm |
| Basement ceiling tiles - replacing? | March 22, 2008, 8:59 pm |
| Dryer vent routing across basement ceiling | November 1, 2005, 1:59 pm |
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap