Home Page link

Cleaning Mold From RTV In Shower Stall ?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Cleaning Mold From RTV In Shower Stall ? Robert11 06-01-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Robert11 on June 1, 2006, 9:09 am
Hello:

Have a shower stall that unfortunately has several corner seams
that were "caulked" with RTV. Of course, by now they have gotten a bit
moldy.

Have tried all the common bathroom stall type cleaners on it, but no luck.

My guess is that the mold, while probably not on the surface, is not very
deep. But, of course, I'm not too sure of this.

Is there any product that stands a chance of cleaning the RTV, that won't
damage or de-glaze the tiles ?

Really don't want to have to rip out all the RTV if I can avoid it.

Thanks,
Bob



Posted by Shopdog on June 1, 2006, 9:11 am
Have you tried Chlorine bleach?

I would just go ahead and remove the RTV and replace with tub and tile
caulk. Better to be done with it and not to have it come back.

Searcher



Posted by willshak on June 1, 2006, 9:25 am
Robert11 wrote:
> Hello:
>
> Have a shower stall that unfortunately has several corner seams
> that were "caulked" with RTV. Of course, by now they have gotten a bit
> moldy.
>
> Have tried all the common bathroom stall type cleaners on it, but no luck.
>
> My guess is that the mold, while probably not on the surface, is not very
> deep. But, of course, I'm not too sure of this.
>
> Is there any product that stands a chance of cleaning the RTV, that won't
> damage or de-glaze the tiles ?
>
> Really don't want to have to rip out all the RTV if I can avoid it.
>
> Thanks,
> Bob

There is a hand tool that will remove the caulk without damaging the
tiles. It's basically just a plastic V-shaped blade with a handle.
You'll probably be done removing the caulk in less than 5 minutes.
Check in HD or Lowes, or your local hardware store.
Here's one:
http://www.homaxproducts.com/products/kitchenbath/03/index.html

--
Bill
In Hamptonburgh, NY
To Email, remove the double zeroes after 'at'

Posted by on June 1, 2006, 9:19 pm
glacial acetic acid
Robert11 wrote:
> Hello:
>
> Have a shower stall that unfortunately has several corner seams
> that were "caulked" with RTV. Of course, by now they have gotten a bit
> moldy.
>
> Have tried all the common bathroom stall type cleaners on it, but no luck.
>
> My guess is that the mold, while probably not on the surface, is not very
> deep. But, of course, I'm not too sure of this.
>
> Is there any product that stands a chance of cleaning the RTV, that won't
> damage or de-glaze the tiles ?
>
> Really don't want to have to rip out all the RTV if I can avoid it.
>
> Thanks,
> Bob


Posted by HarryS on June 1, 2006, 11:20 pm
Mix a 25% solution of liquid laundry bleach in cold water. Use a disposable
spray bottle to spray it on the moldy areas and let it sit overnight. If
the area is large, the chlorine smell will be strong so provide ventilation.
Also, wear old clothes because of the obvious effect of strong bleach on
clothing.

I've used this method numerous times in fiberglass showers and porcelain
tubs and it'll clean the caulking, or tile grout for that matter. The
chlorine in bleach will not only remove the black stain, it will kill the
mold so that it won't come back so soon. It even penetrates silicone caulk
slightly to get the mold organism that embeds itself in the surface.
Eventually, it will come back and you'll have to reapply the bleach.
Discard the spray bottle after you're done because if you try to save it for
next time, the check valve in the spray head will probably be ruined and it
won't spray.

Harry

> Hello:
>
> Have a shower stall that unfortunately has several corner seams
> that were "caulked" with RTV. Of course, by now they have gotten a bit
> moldy.
>
> Have tried all the common bathroom stall type cleaners on it, but no luck.
>
> My guess is that the mold, while probably not on the surface, is not very
> deep. But, of course, I'm not too sure of this.
>
> Is there any product that stands a chance of cleaning the RTV, that won't
> damage or de-glaze the tiles ?
>
> Really don't want to have to rip out all the RTV if I can avoid it.
>
> Thanks,
> Bob
>



Similar ThreadsPosted
Cleaning shower stall glass January 17, 2006, 12:58 pm
Shower stall help? October 31, 2005, 4:46 pm
Shower stall caulking December 20, 2005, 10:17 pm
Fiberglass Shower Stall January 10, 2006, 9:14 am
Shower stall question November 7, 2006, 11:46 am
Re: shower stall light/fan, gfi? March 14, 2007, 7:33 pm
Re: shower stall light/fan, gfi? March 14, 2007, 4:39 pm
Re: shower stall light/fan, gfi? March 15, 2007, 8:29 am
Drywall around shower stall May 31, 2007, 8:00 am
Safety bars in shower stall August 19, 2005, 4:56 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap