|
Posted by trainfan1 on May 22, 2007, 8:52 pm
tomkanpa wrote:
> It has a gearbox that is powered by a belt from the engine. It doesn't
> appear that the belt is slipping. And the arm that engages the gears
> moves. Yet there's no power to the wheels. Well, I take that back. On
> a level driveway, it will pull itself along at a slow pace. At the
> gear box which is part of the axle "jumps up and down." And with the
> engine off and the gearbox engaged, the front wheels are locked as if
> everything is engaged.
> Any ideas on what the problem is?
The worm wheel on the driven axle has worn out. The lever slides the
clutch dog(keyed/splined to the axle) into the worm wheel, which is in
constant mesh with the worm gear.
It's not too bad to repair. All the parts are available at
http://www3.sears.com/
Pack the gearcase well with Lucas Red 'N Tacky #2 grease when reassembling.
Rob
>
|