|
Posted by dpb on May 30, 2008, 12:39 pm
George Abbot wrote:
> dpb wrote:
>> George Abbot wrote:
>> ...
>>
>>> So how do you get the mandrel and ball bearing unit out of the collar
>>> so only the mandrel needs to be replaced? Be nice to have a spare.
>>
>> Best would be to see a picture so can tell how it's put together. W/O
>> seeing, no great ideas other than it possibly will require a press.
>>
>> --
>
> Thanks for the reply.
>
> The IPB shows the mandel, collar and bearing assembly so the mandrel
> goes into the collar and the bearing assembly is at the top of the shaft
> in the collar. Fairly simple so it probably is a press issue. I do not
> see any clips, keys or anything else to keep the shaft of the mandrel in
> the collar.
What shape is the shaft in? Shine it up so don't have extra crap to put
thru the bearing and use some good penetrating oil--something other than
WD40 that will actually have a chance of getting wicked in.
Then, if you don't care about possibly wiping the bearings, a bigger
hammer is the tool if don't have press or can't cobble up something out
of the scrap pile to use w/ a hand jack or don't want to take it to a
machine shop.
--
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap