Home Page link

Craftsman mower won't stay running

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 2 of 4       < 1 2 3 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Craftsman mower won't stay running 46erjoe 07-02-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by digitalmaster on July 2, 2006, 4:20 pm

> Got this Craftsman model 917 6-hp lawn mower for free when I got a new
> house. It starts up fine, but runs for only about 30 seconds and then
> stops.
>
> I know what you're thinking: Fuel delivery problem. I thought so too.
> I pulled off the tank emptied it, blew it dry and put it back on with
> fresh gas. The screen at the bottom of the tank is clear.
>
> If I prime it more than the 5 suggested times, it says, it stays
> running longer.
>
> I did this quite a few times in order to get it hot, but it still
> keeps on shutting down.
>
> The carb is tight to the block. I tried leaving the gas cap on and off
> to see if venting was an issue. Still kept doing the same thing.
>
> The air filter was dirty, so I left it off while testing. Still won't
> run.
>
> Any suggestions?
diaphragm under carb possibly



AppliancePartsPros.com, Inc.
Posted by Pop on July 2, 2006, 4:45 pm
46erjoe wrote:
> Got this Craftsman model 917 6-hp lawn mower for free when
> I got a new house. It starts up fine, but runs for only
> about 30 seconds and then stops.
>
> I know what you're thinking: Fuel delivery problem. I
> thought so too. I pulled off the tank emptied it, blew it
> dry and put it back on with fresh gas. The screen at the
> bottom of the tank is clear.
>
> If I prime it more than the 5 suggested times, it says, it
> stays running longer.
>
> I did this quite a few times in order to get it hot, but it
> still keeps on shutting down.
>
> The carb is tight to the block. I tried leaving the gas cap
> on and off to see if venting was an issue. Still kept doing
> the same thing.
>
> The air filter was dirty, so I left it off while testing.
> Still won't run.
>
> Any suggestions?

You dind't mention the fuel filter; is it clogged?

Definitely sounds like fuel starvation. Can you get gas to come
out of hte hose if you remove it at hte carb? If not, there's a
hint. Is gas comes out, then the carb is the next cluprit even
though you said you cleaned it up. Float stuck? Sunk? Jets
clogged?

HTH
Pop



Posted by Oren on July 2, 2006, 4:58 pm
wrote:

> Float stuck? Sunk? Jets
>clogged?
>
>HTH
>Pop
>

I've looked and looked a sunken float before, sometimes you just never
see the leak. The float is full of fuel.

Oren

Posted by Bob on July 2, 2006, 9:18 pm

> wrote:
>
> > Float stuck? Sunk? Jets
> >clogged?
> >
> >HTH
> >Pop
> >
>
> I've looked and looked a sunken float before, sometimes you just never
> see the leak. The float is full of fuel.

Wouldn't that give you too much fuel?

Bob



Posted by Stormin Mormon on July 2, 2006, 9:40 pm
Sunken float causes flooding. My guess is also some kind of fuel
supply problem. My guess is clogged metering jet. They tend to have
Tecumesh engines, and those jets clog easy. That, or water in the carb
bowl.

--

Christopher A. Young
You can't shout down a troll.
You have to starve them.
.


I've looked and looked a sunken float before, sometimes you just never
see the leak. The float is full of fuel.

Oren



Page 2 of 4       < 1 2 3 > last >>
Similar ThreadsPosted
Craftsman Garage Door will not stay closed June 12, 2006, 4:05 pm
Lawnmower - Wont stay running October 1, 2005, 6:04 pm
Re: Leaf Blower won't stay running May 6, 2006, 9:38 am
Re: Leaf Blower won't stay running May 6, 2006, 9:43 am
Firest everything freezes/now refrigerator will not stay running September 15, 2006, 4:23 pm
Craftsman mower 917.276022 September 28, 2008, 6:32 pm
Re: Craftsman Lawn Mower Problems July 7, 2005, 12:19 am
Craftsman riding mower question May 26, 2006, 10:37 pm
Craftsman Self-Propelled Mower Problem November 3, 2007, 7:02 pm
Need Advice...Craftsman 6.75HP Push Mower April 10, 2006, 10:50 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap