Home Page link

Craftsman table saw, anyone know this model?

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Craftsman table saw, anyone know this model? Pason 05-04-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Pason on May 4, 2007, 1:24 pm


Anyone know anything about this table saw?

http://www3.telus.net/jlh140/saw.jpg

It's apparently 5 years old, but the seller can't find the model number.
I'll go have a look to determine if it's good enough for what I need,
but it'd be nice to hear any opinions.

I want it for general use - I don't do any fine wood working or
cabinetry at least not yet.

Think it's worth $150 CDN?

Thanks for your input.

Radiant Heat 468x60
Posted by Edwin Pawlowski on May 4, 2007, 1:36 pm



> Anyone know anything about this table saw?
>
> http://www3.telus.net/jlh140/saw.jpg
>
> It's apparently 5 years old, but the seller can't find the model number.
> I'll go have a look to determine if it's good enough for what I need, but
> it'd be nice to hear any opinions.
>
> I want it for general use - I don't do any fine wood working or cabinetry
> at least not yet.
>
> Think it's worth $150 CDN?

Looks much like the one that sells for $199US new. You can probably get it
on sale for the price he wants. Personally, I'd not pay more than $75US for
a used one.

It is not a "bad" saw, but if you do get into cabinetry for furniture,
figure to spend about $800US and up for a saw with cast iron top. The
smaller saws are limited in capacity and power.

Get a better blade too, that will make a big difference.





Posted by Toller on May 4, 2007, 1:59 pm



> Anyone know anything about this table saw?
>
> http://www3.telus.net/jlh140/saw.jpg
>
> It's apparently 5 years old, but the seller can't find the model number.
> I'll go have a look to determine if it's good enough for what I need, but
> it'd be nice to hear any opinions.
>
> I want it for general use - I don't do any fine wood working or cabinetry
> at least not yet.
>
> Think it's worth $150 CDN?
>
You will find it impossible to get the fence square, but it should be fine
for carpentry.
BUT, you can buy then new for that price. Used equipment sells for about
half.



Posted by on May 4, 2007, 1:59 pm



>Anyone know anything about this table saw?
>
>http://www3.telus.net/jlh140/saw.jpg
>
>It's apparently 5 years old, but the seller can't find the model number.
> I'll go have a look to determine if it's good enough for what I need,
>but it'd be nice to hear any opinions.
>
>I want it for general use - I don't do any fine wood working or
>cabinetry at least not yet.
>
>Think it's worth $150 CDN?
>
>Thanks for your input.


It looks like the one I have had for the last 30 years (different
knobs on the tilt and depth adjusters).
It has done everything I have asked it to do but do not confuse this
with a precision cabinet saw. The price is what it is, if you can get
it cheaper do it.

Posted by HeyBub on May 4, 2007, 5:54 pm


Pason wrote:
> Anyone know anything about this table saw?
>
> http://www3.telus.net/jlh140/saw.jpg
>
> It's apparently 5 years old, but the seller can't find the model
> number. I'll go have a look to determine if it's good enough for
> what I need, but it'd be nice to hear any opinions.
>
> I want it for general use - I don't do any fine wood working or
> cabinetry at least not yet.
>
> Think it's worth $150 CDN?
>
> Thanks for your input.

Here's the same one for less than $25.00. 'Course you have to drive to
Indiana...



Similar ThreadsPosted
Old Craftsman Circular Saw: Model 207.2560 December 14, 2006, 10:36 pm
Craftsman model # 16644 - Motor runs but has no pressure August 29, 2007, 9:18 pm
Old Craftsman table saw motor died November 20, 2006, 11:05 pm
Radical upside down Craftsman 10" Radial Sled Saw / Upside down table saw April 18, 2008, 8:16 am
Hoover SteamVac V2 WidePath: model 7425-900 vs. model 7431-900 (Sears) May 27, 2006, 1:25 pm
Symmons Model B March 25, 2007, 12:39 pm
Whirlpool model/year September 18, 2005, 6:23 pm
Decyphering AC Tons from model # July 1, 2006, 6:45 pm
Replacing an Aprilaire - Which model? October 11, 2006, 3:13 pm
Hampton Bay Ceiling Fan Model ?? October 17, 2006, 10:07 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap