Home Page link

Culligan control valve question

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Culligan control valve question R Henry 07-02-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by R Henry on July 2, 2006, 1:36 pm
Have a 15 year old Mark 89. Suddenly in service position, has developed
constant flow (barely salty to my taste) to drain, at 22 oz/min. Ceases only
when unit bypassed. Valve has a hissing sound (air leak?) when draining, but
couldn't detect any external leak. Watched the cam, plungers during recharge
cycle, and each phase seems normal length and function; back wash and resin
recharge seem normal,as does rapid rinse.

Service here has been good at allowing me to self-repair other problems,
often with free parts. They're real busy these days and not really
interested in troubleshooting - just set up service call for two weeks away!

Any ideas? Thanks in advance.



Similar ThreadsPosted
Culligan Mark 20 water leak for control assembly January 12, 2008, 2:01 pm
culligan softener valve out of sync March 1, 2007, 7:05 am
gas water heater control valve question April 2, 2008, 1:18 pm
shower control valve June 8, 2008, 11:24 am
Looking for an Itt/General Control Valve MR4J January 11, 2006, 3:51 am
leaking sprinkler control valve July 13, 2007, 9:50 am
gaslogs - valve/control knob November 20, 2007, 1:09 pm
Water softener control valve leaks January 26, 2008, 12:52 pm
Weird electronic pilot/gas control valve problems February 6, 2006, 10:52 pm
Heat pump defrost control board and thermostat reversing valve voltage level February 3, 2006, 12:20 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap