Home Page link

Cutting a vinyl fence

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Cutting a vinyl fence davex1001 06-09-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by davex1001 on June 9, 2006, 10:25 am
What's the best method/tool to cut a vinyl fence? Thanks...


Tankless Water Heaters 468x60
Posted by No on June 9, 2006, 10:36 am
davex1001 wrote:
> What's the best method/tool to cut a vinyl fence? Thanks...
>
Any woodworking tools. The 'best' depends on the type of cut. Finer
tooth blade is better but combination blades should be fine too.

Inviato da X-Privat.Org - Registrazione gratuita http://www.x-privat.org/join.php

Posted by IBM5081 on June 9, 2006, 11:18 am
If installing, use a jigsaw. If removing, use a sawzall.

No wrote:
> davex1001 wrote:
> > What's the best method/tool to cut a vinyl fence? Thanks...
> >
> Any woodworking tools. The 'best' depends on the type of cut. Finer
> tooth blade is better but combination blades should be fine too.
>
> Inviato da X-Privat.Org - Registrazione gratuita
http://www.x-privat.org/join.php


Posted by davex1001 on June 9, 2006, 11:23 am
What kind of blade?

IBM5081 wrote:
> If installing, use a jigsaw. If removing, use a sawzall.
>
> No wrote:
> > davex1001 wrote:
> > > What's the best method/tool to cut a vinyl fence? Thanks...
> > >
> > Any woodworking tools. The 'best' depends on the type of cut. Finer
> > tooth blade is better but combination blades should be fine too.
> >
> > Inviato da X-Privat.Org - Registrazione gratuita
http://www.x-privat.org/join.php


Posted by No on June 9, 2006, 12:39 pm
davex1001 wrote:
> What kind of blade?
>
> IBM5081 wrote:
>> If installing, use a jigsaw. If removing, use a sawzall.
>>
>> No wrote:
>>> davex1001 wrote:
>>>> What's the best method/tool to cut a vinyl fence? Thanks...
>>>>
>>> Any woodworking tools. The 'best' depends on the type of cut. Finer
>>> tooth blade is better but combination blades should be fine too.
>>>
>>> Inviato da X-Privat.Org - Registrazione gratuita
http://www.x-privat.org/join.php
>
Fine tooth woodcutting blade for install. For removal any rough cut
blade will do. You asked about recip saws in another post. Milwaukee
"The Axe" would be a good choice for fast demolition.

Inviato da X-Privat.Org - Registrazione gratuita http://www.x-privat.org/join.php

Similar ThreadsPosted
Re: Cutting Vinyl Siding? May 29, 2008, 4:26 pm
Re: Cutting Vinyl Siding? May 29, 2008, 7:55 pm
Re: Cutting Vinyl Siding? May 29, 2008, 10:32 pm
Installing a vinyl fence June 7, 2006, 8:50 am
Cutting hard metal fence posts.. with what?! October 26, 2007, 5:07 pm
Vinyl fence post question June 13, 2006, 1:25 pm
Attaching a vinyl fence on an angle June 16, 2006, 8:29 am
5' Chain link vinyl fence February 15, 2007, 5:22 pm
Concrete / Fence Post Question (another one - Vinyl) June 17, 2007, 9:51 am
I'm building a 6' high fence and I'm having trouble with land elevations and gaps under fence???? June 6, 2007, 1:06 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap