|
Posted by Speedy Jim on January 2, 2007, 11:06 am
dpb wrote:
> Joe wrote:
>
>>Getting ready to cut a cast iron vent stack to put in a new vent, now I know
>>that I must support the weight of the stack and brace it from side movement
>>I will be renting one of those chain type tools for snapping the pipe. I am
>>concerned since I never did this, what is going to happen since the weight
>>of the stack is still there all though supported from dropping how is it
>>going react, I really don't want this pipe to crack the wrong way. Any one
>>who has done this and can let me know what to expect would be appreciated.
>
>
> How big, how tall, how supported? Nowhere near enough information to
> be able to tell anything about your particular installation.
>
I'm with Joe on this. And it can be risky.
Whatever the weight/height, you need to "preload"
the support system so that when the cut is made,
the stack doesn't drop at all. That's especially
critical in the case where there are connections
above where you are cutting (likely) since movement
of any joints (or the roof terminal) will lead to failures later.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap