If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by Bob on December 18, 2006, 6:32 am
I have some sheet metal that I need to cut for a project. It needs to be a
cleaner cut and more accurate than can be achieved with tin snips.
I considered buying a 7 1/4 inch cutting wheel (if they make them in that
size) and using it in my Skill saw.
My brother said he had heard that taking a regular saw blade and turning it
over so it rotates in the wrong direction, works well for metal cutting.
Anyone ever used this method or have any suggestions - pro or con?
Thanks in advance
|
|
Posted by Andy on December 18, 2006, 7:44 am
Bob wrote:
show/hide quoted text
> I have some sheet metal that I need to cut for a project. It needs to be a
> cleaner cut and more accurate than can be achieved with tin snips.
> I considered buying a 7 1/4 inch cutting wheel (if they make them in that
> size) and using it in my Skill saw.
> My brother said he had heard that taking a regular saw blade and turning it
> over so it rotates in the wrong direction, works well for metal cutting.
> Anyone ever used this method or have any suggestions - pro or con?
> Thanks in advance
Andy writes:
The normal procedure for checking this technique out is to get a
small
piece of scrap and try it out. If it works well, please post it
back here....
I haven't found a way to cut metal that is cleaner than tin snips,
tho.
If you are referring to the serrations that happen when you move the
snips forward, you are doing it incorrectly, or have the wrong kind
of snips.
By the way, the finer the teeth on the blade, the cleaner the cut.
Also, a metal cutting blade put into a skill saw may work also, tho
it actually 'grinds' rather than cuts.
I've also used a jigsaw with a metal cutting blade. But nothing has
done it as clean for me as a shear, which is what tinsnips are....
Andy in Eureka, Texas
|
|
Posted by hallerb@aol.com on December 18, 2006, 7:54 am
you might find a local ductwork or metal shp who can shear it for you.
best cut that way.
so what are you building?
|
|
Posted by Pete C. on December 18, 2006, 3:32 pm
"hallerb@aol.com" wrote:
show/hide quoted text
>
> you might find a local ductwork or metal shp who can shear it for you.
> best cut that way.
>
> so what are you building?
A sheet metal shop may have plasma and/or CNC plasma as well which will
give you nice clean cuts for non-linear stuff that a shear can't do.
Pete C.
|
|
Posted by oklaman on December 18, 2006, 9:07 am
i have used the 'reverse' saw blade before and it worked ok.
I have some sheet metal that I need to cut for a project. It needs to be a
cleaner cut and more accurate than can be achieved with tin snips.
I considered buying a 7 1/4 inch cutting wheel (if they make them in that
size) and using it in my Skill saw.
My brother said he had heard that taking a regular saw blade and turning it
over so it rotates in the wrong direction, works well for metal cutting.
Anyone ever used this method or have any suggestions - pro or con?
Thanks in advance
|
Page 1 of 4 1 2 3 > last >>
| Similar Threads | Posted | | Cutting openings in sheet metal ducts. | October 21, 2007, 8:41 pm |
| Mounting Sheet Metal? | March 26, 2008, 9:14 am |
| Sheet metal quality | October 3, 2009, 12:53 pm |
| Cutting an asbestos sheet? | August 3, 2005, 12:26 pm |
| Re: Cutting an asbestos sheet? | August 4, 2005, 6:18 pm |
| Rare sheet metal tool | February 18, 2006, 12:12 am |
| Sheet metal screw stripped out | September 2, 2006, 11:29 am |
| Re: Painting Galvanized Sheet Metal | April 9, 2008, 11:22 am |
| Re: Painting Galvanized Sheet Metal | April 9, 2008, 11:41 am |
| Re: Painting Galvanized Sheet Metal | April 9, 2008, 12:22 pm |
|
|
> cleaner cut and more accurate than can be achieved with tin snips.
> I considered buying a 7 1/4 inch cutting wheel (if they make them in that
> size) and using it in my Skill saw.
> My brother said he had heard that taking a regular saw blade and turning it
> over so it rotates in the wrong direction, works well for metal cutting.
> Anyone ever used this method or have any suggestions - pro or con?
> Thanks in advance