Home Page link

Difference between a single and double circ. breaker??

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 1 of 2       1 2 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Difference between a single and double circ. breaker?? Dave 06-04-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Dave on June 4, 2006, 5:40 pm
Hello,
In my electrical panel I have a double squeare D breaker with a black/red
wire running to a kitchen plug. When I check the voltage I get 110V at the
outlet. What is the difference between a single (slim) and a double (wide)
breakers. I thought the double ones gave 240V.

Thanks,
D.



Posted by pipedown on June 4, 2006, 5:58 pm
They are just slimmer so two can fit in the place of one. A 220V breaker
would fill two full sized slots not two halves of a slot.


> Hello,
> In my electrical panel I have a double squeare D breaker with a black/red
> wire running to a kitchen plug. When I check the voltage I get 110V at the
> outlet. What is the difference between a single (slim) and a double (wide)
> breakers. I thought the double ones gave 240V.
>
> Thanks,
> D.
>



Posted by RBM on June 4, 2006, 6:25 pm
You're correct, single breakers provide attachment to one hot leg and double
breakers provide attachment to two legs of the panel buss. If your double
pole breaker has a red and a black wire attached to it, you will get 240
volts. My guess is that the outlet has either the red or the black and a
white attached to it. It is common to run three wire circuits for kitchen
outlets, which will provide to 120 volt circuits


> Hello,
> In my electrical panel I have a double squeare D breaker with a black/red
> wire running to a kitchen plug. When I check the voltage I get 110V at the
> outlet. What is the difference between a single (slim) and a double (wide)
> breakers. I thought the double ones gave 240V.
>
> Thanks,
> D.
>



Posted by Stan on June 5, 2006, 9:09 pm

> You're correct, single breakers provide attachment to one hot leg and
> double breakers provide attachment to two legs of the panel buss. If your
> double pole breaker has a red and a black wire attached to it, you will
> get 240 volts. My guess is that the outlet has either the red or the black
> and a white attached to it. It is common to run three wire circuits for
> kitchen outlets, which will provide to 120 volt circuits
>
>
Re above: Should that not read "......., which will provide TWO 120 volt
circuits"?????



Posted by RBM on June 6, 2006, 7:12 am
Absolutely correct. Sometimes I type to fast for my brain


>
>> You're correct, single breakers provide attachment to one hot leg and
>> double breakers provide attachment to two legs of the panel buss. If your
>> double pole breaker has a red and a black wire attached to it, you will
>> get 240 volts. My guess is that the outlet has either the red or the
>> black and a white attached to it. It is common to run three wire circuits
>> for kitchen outlets, which will provide to 120 volt circuits
>>
>>
> Re above: Should that not read "......., which will provide TWO 120 volt
> circuits"?????
>



Page 1 of 2       1 2 > last >>
Similar ThreadsPosted
single gang double 3-way switch May 26, 2006, 8:07 pm
Single to Double Wall Switch Wiring April 5, 2006, 12:02 pm
Double pocket door kit for single width opening? July 5, 2006, 10:46 am
There is no single toggle switch plate for a double gang box? November 18, 2007, 10:44 pm
single or double pole switch for 240V baseboard heater September 10, 2006, 3:40 am
any important difference between a 120/240v breaker and a 240v breaker? December 29, 2007, 7:50 pm
Double Tap on CKT Breaker August 2, 2005, 11:36 pm
Double pole circuit breaker January 16, 2007, 11:22 pm
installing double-pane windows: double-sided tape separating from window or window-frame May 31, 2006, 10:56 am
A/C Unit Keeps Tripping Circuit Breaker - How to test breaker before calling repair man? August 25, 2005, 4:47 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap