|
Posted by silenceseeker2003@yahoo.com on April 19, 2008, 10:42 am
On Apr 19, 10:35 am, "silenceseeker2...@yahoo.com"
> On Apr 19, 10:09 am, "silenceseeker2...@yahoo.com"
>
>
>
>
>
> > > > I have a Maytag QuietSeries 300 dishwasher, model MDB9600AWQ.
>
> > > > Several months ago, its display panel started acting funny (only part
> > > > of the green LED segments actually lit) but it continued working fine
> > > > - until today.
>
> > > > Today, when I tried to operate it as usual, pressing the Start button,
> > > > the dishwasher simply wouldn't react. As if the Start button was never
> > > > pressed.
>
> > > > The Delay button responds. All top buttons (the ones that select the
> > > > program type) respond. But the Start button seems to be "dead".
>
> > > > I searchedhttp://www.repairclinic.com/SmartSearch/smartsearch.aspx
> > > > for a logical part (panel or control or something along this) and all
> > > > I could find was "Board, control": Item # 1173225 and Item # 1074739.
>
> > > > They are both expensive (around $100) so obviously I would like to be
> > > > certain which part I need to order in order to repair this problem.
>
> > > > Your help regarding which part is defective and needs replacement
> > > > would be much appreciated.
>
> > > > Thanks,
> > > > Sam
>
> > > You never absolutely know for sure until you replace something and it
> > > fixes it right? Repairclinic.com does allow returns. Just get what you
> > > think could be it for one shipping charge and return the unused. You just
> > > have to pay for return shipping.
>
> > > ...or call an appliance repair service.
>
> > I actually found a better site - that not only lists the parts but
> > also displays the relevant diagrams - very helpful:
>
> >http://tinyurl.com/3hfxhc
>
> >http://www.partselect.com/Maytag-Dishwasher-Parts.htm
>
> > It seems that the Start "button" (low quality tactile-less pad that
> > convinced me that I will never by Maytag again) is what stopped
> > working. The problem is... this button cannot be replaced by itself -
> > it requires replacing the entire panel (P/N PS728446, "PANEL, CONTROL
> > (BSQ)")
>
> >http://tinyurl.com/4mfmbm
>
> >http://tinyurl.com/44e8jf
>
> > It costs $72.72 but it may be a good idea to replace it since the
> > "professional technician" that was sent by Maytag to repair the latch
> > 2 years ago, actually broke the CHEAP plastic hinges that hold the
> > latch. So by replacing the anel I would actually fix two problems. :)
>
> > Thanks to all of you who responded.
>
> > Sam
>
> Oh - and inhttp://www.searspartsdirect.com it is Part# 99002795 -
> costs 79.79.
and in http://www.mdappliance.com/WPL-99002795.html it costs only
$69.99 but it is listed not only as a Maytag part but also as
Whirlpool.
Also, repairclinic.com seems to *not* offer this part.
It can also purchased in partstore.com:
http://www.partstore.com/Part/Maytag/Maytag/99002795/New.aspx
Sam
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap