Home Page link

Door sill replacement-- Best wood and treatment???

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Door sill replacement-- Best wood and treatment??? Pelorus 04-18-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Pelorus on April 18, 2007, 1:47 pm


I have an old house in Vermont with a rotting door sill in need of
replacement. What is the best wood to use for this project?
Secondly, what should I do to treat the wood to ensure it will last?


Posted by dpb on April 18, 2007, 2:16 pm


> I have an old house in Vermont with a rotting door sill in need of
> replacement. What is the best wood to use for this project?
> Secondly, what should I do to treat the wood to ensure it will last?


What do you need to match, if anything? What was the existing one and
how long did it last? If appearance isn't much of an issue, pressure
treated would be the most long-lasting unless went w/ one of the
replacemant materials like Trex, etc.

I'd guess the original was probably either pine or fir and last "a
long time" and a replacement would as well. Painting all surfaces
before installing will help a lot, making sure water drains rather
than puddles will go a long way after that.

For more specific alternate suggestions, need to know more...


Posted by Pelorus on April 18, 2007, 5:59 pm


I appreciate the response. The door sill is for the front door of the
"original" two-story farm house built in the early 1800s. The current sill
has been in service for at least 50 years. The painted sill is fully
exposed to the elements. Given the poor condition of the existing sill I
can't really judge what type of wood it is-- other than rotted. My first
inclination is to use a piece of oak (perhaps an oak riser). As you
suggested I will probably prime it and put some durable deck paint on it
before installation. Given that there is not a straight line or standard
anything in the whole house, I think the challenge of the project will be
finding a replacement sill and fitting it. Thanks again for responding.



>> I have an old house in Vermont with a rotting door sill in need of
>> replacement. What is the best wood to use for this project?
>> Secondly, what should I do to treat the wood to ensure it will last?
>
>
> What do you need to match, if anything? What was the existing one and
> how long did it last? If appearance isn't much of an issue, pressure
> treated would be the most long-lasting unless went w/ one of the
> replacemant materials like Trex, etc.
>
> I'd guess the original was probably either pine or fir and last "a
> long time" and a replacement would as well. Painting all surfaces
> before installing will help a lot, making sure water drains rather
> than puddles will go a long way after that.
>
> For more specific alternate suggestions, need to know more...
>



Posted by Jeff Wisnia on April 18, 2007, 6:38 pm


Pelorus wrote:

> I appreciate the response. The door sill is for the front door of the
> "original" two-story farm house built in the early 1800s. The current sill
> has been in service for at least 50 years. The painted sill is fully
> exposed to the elements. Given the poor condition of the existing sill I
> can't really judge what type of wood it is-- other than rotted. My first
> inclination is to use a piece of oak (perhaps an oak riser). As you
> suggested I will probably prime it and put some durable deck paint on it
> before installation. Given that there is not a straight line or standard
> anything in the whole house, I think the challenge of the project will be
> finding a replacement sill and fitting it. Thanks again for responding.

I'd agree with the oak if you can get it. If you can't get oak, then go
with pine.

Paint on linseed oil thinned with mineral spirits. That stuff soaks in
well and is likely what they would have used back when the place was
built. It's what I use on the sills of my 22 year olde home too.

You can add a little dark oil based stain to the mixture if you want to
give it a nice "lived in look" in a hurry.

Jeff

--
Jeffry Wisnia
(W1BSV + Brass Rat '57 EE)
The speed of light is 1.8*10^12 furlongs per fortnight.


>
>
>
>
>>
>>>I have an old house in Vermont with a rotting door sill in need of
>>>replacement. What is the best wood to use for this project?
>>>Secondly, what should I do to treat the wood to ensure it will last?
>>
>>
>>What do you need to match, if anything? What was the existing one and
>>how long did it last? If appearance isn't much of an issue, pressure
>>treated would be the most long-lasting unless went w/ one of the
>>replacemant materials like Trex, etc.
>>
>>I'd guess the original was probably either pine or fir and last "a
>>long time" and a replacement would as well. Painting all surfaces
>>before installing will help a lot, making sure water drains rather
>>than puddles will go a long way after that.
>>
>>For more specific alternate suggestions, need to know more...
>>
>
>
>


--
Jeffry Wisnia
(W1BSV + Brass Rat '57 EE)
The speed of light is 1.8*10^12 furlongs per fortnight.


Posted by dpb on April 18, 2007, 7:09 pm


> Pelorus wrote:
> > I appreciate the response. The door sill is for the front door of the
> > "original" two-story farm house built in the early 1800s. The current sill
> > has been in service for at least 50 years. The painted sill is fully
> > exposed to the elements. Given the poor condition of the existing sill I
> > can't really judge what type of wood it is-- other than rotted. My first
> > inclination is to use a piece of oak (perhaps an oak riser). As you
> > suggested I will probably prime it and put some durable deck paint on it
> > before installation. Given that there is not a straight line or standard
> > anything in the whole house, I think the challenge of the project will be
> > finding a replacement sill and fitting it. Thanks again for responding.
>
> I'd agree with the oak if you can get it. If you can't get oak, then go
> with pine.
...

If you use oak, be sure it's white oak, not red. Red oak does NOT
stand up to weather well at all (being ring porous and all).

Oak has advantage of being hard but in old house with uneven/out of
square may be more difficult to work while fitting unless have
jointer, etc. Not impossible, just more effort.

For the application, I'd probably go w/ the pine or fir as more
"period". As you note, even with pine, it likely will outlast
you... :)


Similar ThreadsPosted
Transition from Engineered Wood Floor to Sliding Door w/Metal Sill May 26, 2006, 1:05 pm
Re: Do I need to repair some rot in the sill when getting replacement windows? March 25, 2007, 11:41 pm
Re: Do I need to repair some rot in the sill when getting replacement windows? March 27, 2007, 12:51 am
Rotting sill replacement on Caradco windows February 9, 2007, 7:02 pm
sill plate replacement in basement revisited February 26, 2008, 9:24 am
rotted sill +wood filler question:help please January 7, 2007, 7:57 pm
Patio door sill October 6, 2005, 10:12 pm
Door catching on sill July 29, 2007, 4:29 pm
Replacing Door Sill and Threshold July 20, 2006, 11:21 pm
New Patio Door and "build up" of sill. January 21, 2007, 6:58 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap