|
Posted by Phisherman on December 22, 2007, 11:35 am
I'm installing a double sink. The basins are 20 gallons each and the
drains are about 8" apart. I will be installing a 1.5" PVC vent
around the room near the top of the studs to serve all the fixtures.
There are two ways to connect the sink drain--a single trap or
separate traps for each basin. If I install separate traps, I could
install a separate vent for each trap. I want to eliminate any
possibility of waste water draining from one basin to enter the other
(empty) basin. What is the best configuration?
|