|
Home Repair - - If it ain't broken, don't fix it. Otherwise look here.
|
|
|
|
If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by Gene on August 13, 2005, 1:38 pm
I thought I'd post some information I found useful.
In an earlier posting from "Big T", a strong magnet was used to
retrieve a screw that was accidentally dropped into a dishwasher. The
magnet was purchased at Wal-Mart's automotive department.
This advice was very useful, since I was able to retreive a dropped
screw from my Maytag Dishwasher (Model MDB5100AWW).
Since the closest Wal-Mart is about 15 miles away, I instead went to
pep boys and purchased a "Performance Tool" Pocket Magnetic Retriever
(It was only $3.99).
This particular magnet was useful, primarily because dishwasher drain
is difficult to get to. There are many dishwashing parts in the way,
and the drain itself is protected by a circular 'catch' where the holes
are about the size of a pinky nail.
It doesn't matter if you get this particular magnet or not - what
matters is that you get a magnet that is short (so it can fit in this
very cramped working area), telescopic (so you can extend it into the
drain once you're able to fit it into the cramped area), and slightly
flexible (so it can slightly bend to get to all areas in the drain).
Although my magnet did not become stuck in the drain, I'd recommend
approaching this job with a lot of patience - the last thing you'd want
to do is to get the magnet stuck in the dishwashing drain.
I also purchased a swivel inspection mirror, but it proved not very
useful because the drain catch holes are so small, and the area so
cramped, that for all intensive purposes it is not possible to see into
the drain. Although I do have to say that it gave me enough of an idea
of how the drain was made to make my search a little more effective.
In any case, it took about 45 minutes of placing the magnet in all
sorts of different positions to finally get that screw out. But hey,
it saved me the cost and the time of having a repairman to come out.
For one, the head of the magnet was magnetic in almost all sides
|
|
Posted by Don Phillipson on August 13, 2005, 6:01 pm
> In any case, it took about 45 minutes of placing the magnet in all
> sorts of different positions to finally get that screw out. But hey,
> it saved me the cost and the time of having a repairman to come out.
Now you know why experienced servicemen cover the
drain with a tea towel before starting work.
--
Don Phillipson
Carlsbad Springs
(Ottawa, Canada)
|
| Similar Threads | Posted | | COOKTOP DROPPED IN, OVEN POPPPED IN, AND DISHWASHER SLIPPED IN | November 4, 2006, 9:03 pm |
| hot water pressure dropped in 2 faucets | October 21, 2005, 10:03 am |
| Coin Dropped into Dryer Lint Filter | May 6, 2007, 11:28 pm |
| Genie Garage Door Opener screw drive - Screw coming apart | June 23, 2007, 7:17 pm |
| Methelene / Methylene Chloride Stain (Drinking Bird Dropped on Sheet Vinyl Floor) | November 19, 2006, 9:16 pm |
| Ceiling tiles, dropped ceiling | November 6, 2007, 2:30 pm |
| G.E. Dishwasher Recall - What to do with Old Dishwasher | July 1, 2007, 4:03 pm |
| Drilling Out Screw | November 17, 2005, 1:24 pm |
| How to remove one way screw? | June 17, 2005, 4:13 pm |
| Screw Gun Problem | February 7, 2007, 10:46 am |
|
|
|
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap