Home Page link

Dryer Vent Hood Height On Wall?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 1 of 2       1 2 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Dryer Vent Hood Height On Wall? John Ross 07-25-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by John Ross on July 25, 2006, 6:13 am
I need to vent an electrical drier to an outside wall (it's in an
attached garage). Is there any "standard" or minimum recommended height
to put the vent through the wall (on the outside)? I talked with a
handyman about doing this and I mentioned that I thought I heard
somewhere it should be at least 12 inches off the ground. He said he
never heard of that, and I believe he would want to put it quite low on
the wall. Opinions?

Would there be a code for something like this?

--
John Ross


Posted by Joseph Meehan on July 25, 2006, 7:05 am
John Ross wrote:
> I need to vent an electrical drier to an outside wall (it's in an
> attached garage). Is there any "standard" or minimum recommended
> height to put the vent through the wall (on the outside)? I talked
> with a handyman about doing this and I mentioned that I thought I
> heard somewhere it should be at least 12 inches off the ground. He
> said he never heard of that, and I believe he would want to put it
> quite low on the wall. Opinions?
>
> Would there be a code for something like this?

If you are in a snow area, you need to make sure it is high enough to be
above the expected snow fall. That is likely were you got that 12 inch
number. Personally I would consider 12 inch a good number to start with.

--
Joseph Meehan

Dia duit



Posted by HerHusband on July 25, 2006, 10:41 am
John,

> I need to vent an electrical drier to an outside wall (it's in an
> attached garage). Is there any "standard" or minimum recommended height
> to put the vent through the wall (on the outside)? I talked with a
> handyman about doing this and I mentioned that I thought I heard
> somewhere it should be at least 12 inches off the ground. He said he
> never heard of that, and I believe he would want to put it quite low on
> the wall. Opinions?

I don't know if the vent height is regulated by code, but there are a few
practical things to consider.

1. It's easier to route the vent through a wood wall than through concrete.
If your garage sits on a foundation (not just a slab), the vent should be
above the height of the concrete stemwall.

2. The vent should be high enough to keep "critters" like mice and
squirrels out of the vent.

3. The vent should be high enough that winter snows won't block the vent.
That height really depends on where you are located and how much snow you
typically get.

4. Straighter is better. If the dryer sits up off the floor, a straight
shot out the back would be best. If you have to angle the vent up or down,
try to minimize the number of bends.

Your 12" height sounds fine to me unless one of the above applies.

Anthony

Posted by Edwin Pawlowski on July 25, 2006, 11:13 am

> 3. The vent should be high enough that winter snows won't block the vent.
> That height really depends on where you are located and how much snow you
> typically get.

> Your 12" height sounds fine to me unless one of the above applies.
>

I've heard numbers like 48" around here, but I have no idea if that is a
code or not. We get a lot of snow at times. Mine is about 96", but that is
as much about ease of a straight run.



Posted by John Ross on July 26, 2006, 5:50 am


HerHusband wrote:
> John,
>
> > I need to vent an electrical drier to an outside wall (it's in an
> > attached garage). Is there any "standard" or minimum recommended height
> > to put the vent through the wall (on the outside)? I talked with a
> > handyman about doing this and I mentioned that I thought I heard
> > somewhere it should be at least 12 inches off the ground. He said he
> > never heard of that, and I believe he would want to put it quite low on
> > the wall. Opinions?
>
> I don't know if the vent height is regulated by code, but there are a few
> practical things to consider.
>
> 1. It's easier to route the vent through a wood wall than through concrete.
> If your garage sits on a foundation (not just a slab), the vent should be
> above the height of the concrete stemwall.
>
> 2. The vent should be high enough to keep "critters" like mice and
> squirrels out of the vent.
>
> 3. The vent should be high enough that winter snows won't block the vent.
> That height really depends on where you are located and how much snow you
> typically get.
>
> 4. Straighter is better. If the dryer sits up off the floor, a straight
> shot out the back would be best. If you have to angle the vent up or down,
> try to minimize the number of bends.
>
> Your 12" height sounds fine to me unless one of the above applies.
>
> Anthony

First, we don't get any snow, so that is not an issue.

Unfortunately, it gets a bit more complicated. The dryer is against the
wall that goes into the house so a straight shot out the back is not
possible. The external garage wall is at a right angle to the
dryer--about 5 feet. But, it can't really go straight out to the side
either because there is a water faucet in about that location on the
outside (the whole side of the garage is clear except right there--all
the luck!) There is also a hose storage thing hanging above the faucet.
So to avoid that you have to go down the wall a few feet. But then
there just happens to be a garage vent (open screen vent to outside
near ground). It could go above that, but is that a good idea? Is it
possible the lint could end up right back in the garage or getting
caught in the wall vent screen?

--
John Ross


Page 1 of 2       1 2 > last >>
Similar ThreadsPosted
Min Height between range and Microwave hood? March 15, 2008, 10:12 am
Range hood vent options/ self venting or vent through roof ? September 2, 2007, 10:35 am
Noisy vent hood July 30, 2005, 1:46 am
Attic fan for vent a hood October 25, 2005, 12:35 am
Stove Hood Vent Odor October 22, 2005, 4:00 pm
No vent hood over island range? December 6, 2005, 6:42 pm
Looking for a range hood with an offset vent May 31, 2006, 10:36 am
stove hood vent question March 5, 2007, 1:18 pm
Wiring a Vent-a-hood in a special way July 13, 2007, 8:34 pm
Installing vent hood in small deli. January 30, 2006, 2:23 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap