Home Page link

Dryer is no longer spinning

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Dryer is no longer spinning affiliateian 03-11-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by on March 11, 2007, 11:00 pm


ABout 1 week ago, the dryer was not drying clothes as well as before
so the plastic ducting in the rear was replaced with an aluminum
(bendable) 4 inch duct. 1 week later, the dryer turns on and heat is
generated but the tumbler is no longer tumbling. Before calling a
repair company, is there something to try (without actually opening it
up)? Any tips would be great.


Posted by on March 12, 2007, 4:31 am


On 11 Mar 2007 20:00:11 -0700, affiliateian@gmail.com wrote:

>ABout 1 week ago, the dryer was not drying clothes as well as before
>so the plastic ducting in the rear was replaced with an aluminum
>(bendable) 4 inch duct. 1 week later, the dryer turns on and heat is
>generated but the tumbler is no longer tumbling. Before calling a
>repair company, is there something to try (without actually opening it
>up)? Any tips would be great.

The belt may have slipped off. Is there an access door on the lower
end of the dryer? Does the top of the dryer lift off? If so just
reposition the belt or replace it.

Posted by on March 12, 2007, 2:18 pm


All very good tips. Thanks everyone. I think this one is beyond me and
have called in the expert. So there is another lint trap inside the
machine besides the one that requires cleaning after each load? Or did
I misunderstand?

There is no door on the front lower panel and nor can I pop the top
portion off to take a look at the belt. Hope the repair man does not
have to get access from the rear.


Posted by on March 12, 2007, 2:25 pm


Update: Managed to get the top of the dryer to pop up. There were 2
clips that needed a screwdriver to unlock the clips. The thin belt
that should be wrapped around the drum has snapped. Called the
repaiman anyway but thanks for all the tips. Made me do some more
reading and curiosity made me try to open the thing. Whatdaya know!? :)


Posted by Jackson on March 12, 2007, 8:27 pm



> Update: Managed to get the top of the dryer to pop up. There were 2
> clips that needed a screwdriver to unlock the clips. The thin belt
> that should be wrapped around the drum has snapped. Called the
> repaiman anyway but thanks for all the tips. Made me do some more
> reading and curiosity made me try to open the thing. Whatdaya know!? :)
>

Your over half way there - now that the top is off look down at the bottom
of the front of the dryer. Typically there are a couple of screws that
remove the front, or sometimes they are under the lid on the front panel.
Once the front is of changing the belt is a snap!

If you can't unplug the thing be sure the breaker is off, and test it to
make sure it is getting no power though before you start ripping into it!



Similar ThreadsPosted
Maytag dryer hums, not spinning October 23, 2005, 8:03 pm
Tumble dryer has stopped spinning. November 9, 2006, 11:15 am
Clothes Dryer Taking Longer..... March 27, 2006, 3:22 pm
Spinning Keyhole in Doorknob November 6, 2008, 1:32 am
Washing machine is not spinning round September 1, 2005, 12:56 pm
Frigidare Washing Machine not spinning November 27, 2005, 10:57 pm
Kenmore Washer-not agitating or spinning July 16, 2006, 9:48 pm
Maytag LAT4915 Washer not spinning September 3, 2006, 8:47 pm
How to stop inside of sink pop out from spinning? September 15, 2006, 10:34 pm
Maytag MAV6000 Very noisy when spinning January 10, 2007, 10:51 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap