Home Page link

Drywall Repair -- Door handle hole

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 1 of 3       1 2 3 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Drywall Repair -- Door handle hole The Ranger 04-26-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by The Ranger on April 26, 2007, 10:59 pm


My daughter-units had a sleep-over where the pack were having too
much fun and not enough supervision. The result: a doorknob-sized
hole in my bathroom wall. There's not enough drywall left to pull
it back through and patch it.

I'd like to enhance the structure at this point. Is there a way of
supporting it beyond a simple cross-piece attached from the back?

Many thanks.

The Ranger



Posted by Jimi on April 26, 2007, 11:09 pm



> My daughter-units had a sleep-over where the pack were having too much fun
> and not enough supervision. The result: a doorknob-sized hole in my
> bathroom wall. There's not enough drywall left to pull it back through and
> patch it.
>
> I'd like to enhance the structure at this point. Is there a way of
> supporting it beyond a simple cross-piece attached from the back?
>
> Many thanks.
>
> The Ranger
>
Hello Ranger,

Rather than the simple cross piece from the back that you don't want to
do, take the knife and cut it to the studs on each side and remud the
works...Then buy a good floor mounted door stopper.Jim



Posted by Nexus7 on April 26, 2007, 11:18 pm


> much fun and not enough supervision. The result: a doorknob-sized
> hole in my bathroom wall. There's not enough drywall left to pull
> it back through and patch it.
>
> I'd like to enhance the structure at this point. Is there a way of
> supporting it beyond a simple cross-piece attached from the back?

Not sure what you mean by "cross-piece attached from the back." You
take a piece of wood about 6" longer than the hole, insert it in, and
attach with a drywall screw or two on each side from the front. Then
screw a door knob-sized piece of drywall to the wood.




Posted by Ron on April 29, 2007, 10:44 am


>
> > much fun and not enough supervision. The result: a doorknob-sized
> > hole in my bathroom wall. There's not enough drywall left to pull
> > it back through and patch it.
>
> > I'd like to enhance the structure at this point. Is there a way of
> > supporting it beyond a simple cross-piece attached from the back?
>
> Not sure what you mean by "cross-piece attached from the back." You
> take a piece of wood about 6" longer than the hole, insert it in, and
> attach with a drywall screw or two on each side from the front. Then
> screw a door knob-sized piece of drywall to the wood.

Just had my home replumbed and that is exactly how the dry wall guys
replaced the sheet rock that the plumbers had to cut out. (except for
the 6" longer part, but of course they weren't trying to reinforce)


Posted by The Ranger on April 29, 2007, 12:12 pm


> > wrote:
> >
> > > much fun and not enough supervision. The result: a
> > > doorknob-sized
> > > hole in my bathroom wall. There's not enough drywall left to
> > > pull
> > > it back through and patch it.
> > >
> > > I'd like to enhance the structure at this point. Is there a
> > > way of
> > > supporting it beyond a simple cross-piece attached from the
> > > back?
> > >
> > Not sure what you mean by "cross-piece attached from the
> > back."
> > You take a piece of wood about 6" longer than the hole, insert
> > it in,
> > and attach with a drywall screw or two on each side from the
> > front.
> > Then screw a door knob-sized piece of drywall to the wood.
> >
> Just had my home replumbed and that is exactly how the dry wall
> guys
> replaced the sheet rock that the plumbers had to cut out.
> (except for
> the 6" longer part, but of course they weren't trying to
> reinforce)

Yes, well that's predicated on the ideal that there's still the
whole piece left and not a bunch of crumble and powder still held
in place because there happens to be some backing paper still
attached.

Imagine a hole, the size of the standard bathroom handle (exactly
2" in diameter) where anodized steel punch through 1/2" sheet
rock, leaving nothing larger than 1/4" chunks. That's what's wrong
with using the 6" longer part attached from behind; there's
nothing left to attach to the backer. And the last I checked,
"pieces" of drywall were not being sold at Lowe's, Home Despot or
my local ACE hardware store; only 4'X8' sheets. While I have the
storage abilities to keep such a piece, that seems a little
extreme for my current needs.

I used the idea of cutting out an over-sized circle of stiff mesh
and then closing the hole with compound. It took two full days to
dry, sand, touch-up, and finish off but it looks *good*. I also
added a brass floor stop which has already paid for itself.
(There's nothing like the shock of a temper-throwing preteen
having the door bound back at her to give the idea that trashing
something that's not hers is uncool.)

The Ranger



Page 1 of 3       1 2 3 > last >>
Similar ThreadsPosted
single handle faucet repair August 11, 2005, 7:05 pm
Downsizing a hole in drywall August 29, 2006, 3:25 pm
To fix hole or patch section in drywall April 14, 2007, 12:00 pm
shower head - repair wall mount handle December 22, 2006, 10:36 am
Odd Backset Door Handle November 26, 2005, 3:04 pm
Door handle question December 11, 2006, 1:10 pm
Mouse coming from drywall hole, how to plug up? July 10, 2005, 11:15 am
Storm door handle broken March 6, 2007, 6:33 pm
handle for older solid wood door August 25, 2005, 10:43 am
handle for older solid wood door August 25, 2005, 10:46 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap