|
Posted by Dean on May 31, 2007, 8:36 am
On May 31, 7:00 am, bslu...@gmail.com wrote:
> I have a fiberglass shower stall and when it is used, water splashes
> off of who ever is using it and wets the first 4-6 inches of wall at
> the top of the shower stall. This of course has eventually caused the
> paint and what ever else the builder used to crack. What are my
> options? I figure worse case, I can cut out the first foot or so up
> of drywall/greenboard replace and tile. Is there any type of mud or
> paint I could use to seal the wall?
Have You tried prepping and applying a high gloss paint? The more
gloss the better it repels water and the easier to wipe clean..That's
why bathrooms and kitchens are often glossy..You may or may not want
to gloss the entire bathroom due to steam,,a good vent fan helps with
that of course..
Personally I do'nt like high gloss paint but I do see the sense in
certain applications..Satin is usually enough gloss for Me in LRs and
BRs..
Dean
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap