|
Posted by Red Green on April 12, 2008, 10:17 pm
> I finished wiring up my 3 way switches I asked about a while ago, but
> the one switch only worked in one position. I assumed I had a common
> and traveller reversed somewhere, but the wiring seemed fine. I
> finally pulled both switches to check continuity and the same push
> connector was bad on both switches, as well as a third switch I have
> for another circuit. I changed to the screw connectors on both
> switches and all is beautiful now!
>
> Thanks to Terry and RBM for the original help. I did end up cutting
> out the entire ceiling betyween the two fixtures as you suggested. :-)
>
>
>
Guess you didn't mention you would be backstabbing it to hook it up. If
you did you would have got many one word replies - "Don't".
Someone please tell me why they even put that options on?! They are
notorious for failing as well as a fire and safety bombshell waiting to
go off, yet, code must allow it.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap