Home Page link

Electrician Costs? Installing a ceiling fan with new electrical box.

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 3 of 5       < 1 2 3 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Electrician Costs? Installing a ceiling fan with new electrical box. Johndagolfer 06-25-2008
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by evodawg on June 25, 2008, 7:37 pm
Johndagolfer@gmail.com wrote:

>>
>>
>>
>>
>> > Hi all,
>>
>> > I need to hire an electrician to install 2 ceiling fans in my house.
>>
>> > Master bedroom: There is access in a crawlspace for this room through
>> > the closet access panel
>> > Living room: There is no access here.
>>
>> > Both rooms appear to not have any preexisting hook ups.
>>
>> > Not including the fan how much should this job cost?
>>
>> > For just the master I have been quoted 253 labor only and probbably
>> > much more for the downstairs.
>>
>> > What do you guys think?
>>
>> I'm assuming that there is no existing wiring in place. There are a few
>> variables to consider. Will the fans also have light kits? Do you want
>> a
>> separate wall switch for the fan and one for the light kit? If so do you
>> want a dimmer for the light kit? Would you prefer to not have any wall
>> switches and just use the pull chains or a remote control for the fan and
>> light? I suggest that you go with wall switches as frequent pulling on
>> the chains can wear out those switches prematurely and to pay someone to
>> replace
>> them might add up to the cost of the fan. The wall switches are good if
>> you decide to get rid of the fan in the future and install a regular
>> light
>> fixture instead. If you decide to have one wall switch for the fan and
>> light kit you will be going forth and back between the pull chain and
>> wall switch to shut the light off and leave the fan on.
>>
>> Since there is no access for the living room, some holes will need to be
>> made in the ceiling and wall so that wiring can be installed. Will you
>> be making the necessary patches to these holes or do you want the
>> electrician
>> to do it? Are you going to be responsible for repainting the walls and
>> ceiling after the holes have been patched or do you want the contractor
>> to do it?
>
> Hi John,
>
> To answer your question, the fan I want has lights built in to it, it
> isn't a kit or anything. The fans, which are both the same come with
> remote controls. Does this mean I don't need a wall switch?
> Shouldn't the remove me enough? The fans I am getting are really high
> quality fans and look really good, I doubt we will replace them before/
> if we ever move.
>
> This was a question I wanted to ask. Do electricials repair that
> drywall for the damage that is done when peforming the job? How is
> this normally repaired?
>
> So guys, thanks for the response. I am in the middle of getting more
> quotes. It seems like there is some agreement that 253 for no pre
> existing wiring, with access through a attic crawlspace is too much.
>
> I am correct in this assumption?
>
> John

Where do you live? That estimate is not that far off where I come from. Now
if you live in the Ozarks then yes it would be off. You could expect a
100.00 estimate from someone in that region. I wonder how many here giving
their advice are weekend warriors or qualified electricians?

--
"You can lead them to LINUX
but you can't make them THINK"
Running Mandriva release 2008.0 free-i586 using KDE on i586

Posted by on June 25, 2008, 7:51 pm
> Johndagol...@gmail.com wrote:
>
>
> >> > Hi all,
>
> >> > I need to hire an electrician to install 2 ceiling fans in my house.
>
> >> > Master bedroom: There is access in a crawlspace for this room through
> >> > the closet access panel
> >> > Living room: There is no access here.
>
> >> > Both rooms appear to not have any preexisting hook ups.
>
> >> > Not including the fan how much should this job cost?
>
> >> > For just the master I have been quoted 253 labor only and probbably
> >> > much more for the downstairs.
>
> >> > What do you guys think?
>
> >> I'm assuming that there is no existing wiring in place. There are a few
> >> variables to consider. Will the fans also have light kits? Do you want
> >> a
> >> separate wall switch for the fan and one for the light kit? If so do you
> >> want a dimmer for the light kit? Would you prefer to not have any wall
> >> switches and just use the pull chains or a remote control for the fan and
> >> light? I suggest that you go with wall switches as frequent pulling on
> >> the chains can wear out those switches prematurely and to pay someone to
> >> replace
> >> them might add up to the cost of the fan. The wall switches are good if
> >> you decide to get rid of the fan in the future and install a regular
> >> light
> >> fixture instead. If you decide to have one wall switch for the fan and
> >> light kit you will be going forth and back between the pull chain and
> >> wall switch to shut the light off and leave the fan on.
>
> >> Since there is no access for the living room, some holes will need to be
> >> made in the ceiling and wall so that wiring can be installed. Will you
> >> be making the necessary patches to these holes or do you want the
> >> electrician
> >> to do it? Are you going to be responsible for repainting the walls and
> >> ceiling after the holes have been patched or do you want the contractor
> >> to do it?
>
> > Hi John,
>
> > To answer your question, the fan I want has lights built in to it, it
> > isn't a kit or anything. The fans, which are both the same come with
> > remote controls. Does this mean I don't need a wall switch?
> > Shouldn't the remove me enough? The fans I am getting are really high
> > quality fans and look really good, I doubt we will replace them before/
> > if we ever move.
>
> > This was a question I wanted to ask. Do electricials repair that
> > drywall for the damage that is done when peforming the job? How is
> > this normally repaired?
>
> > So guys, thanks for the response. I am in the middle of getting more
> > quotes. It seems like there is some agreement that 253 for no pre
> > existing wiring, with access through a attic crawlspace is too much.
>
> > I am correct in this assumption?
>
> > John
>
> Where do you live? That estimate is not that far off where I come from. Now
> if you live in the Ozarks then yes it would be off. You could expect a
> 100.00 estimate from someone in that region. I wonder how many here giving
> their advice are weekend warriors or qualified electricians?
>
> --
> "You can lead them to LINUX
> but you can't make them THINK"
> Running Mandriva release 2008.0 free-i586 using KDE on i586

I live near Lexington Kentucky. If $253 for no pre exisiting wiring
is on par with a crawl space, how much for no crawl space. The
downstairs living room has the master bedroom above it.

Posted by evodawg on June 25, 2008, 8:01 pm
Johndagolfer@gmail.com wrote:

>> Johndagol...@gmail.com wrote:
>>
>>
>> >> > Hi all,
>>
>> >> > I need to hire an electrician to install 2 ceiling fans in my house.
>>
>> >> > Master bedroom: There is access in a crawlspace for this room
>> >> > through the closet access panel
>> >> > Living room: There is no access here.
>>
>> >> > Both rooms appear to not have any preexisting hook ups.
>>
>> >> > Not including the fan how much should this job cost?
>>
>> >> > For just the master I have been quoted 253 labor only and probbably
>> >> > much more for the downstairs.
>>
>> >> > What do you guys think?
>>
>> >> I'm assuming that there is no existing wiring in place. There are a
>> >> few
>> >> variables to consider. Will the fans also have light kits? Do you
>> >> want a
>> >> separate wall switch for the fan and one for the light kit? If so do
>> >> you
>> >> want a dimmer for the light kit? Would you prefer to not have any
>> >> wall switches and just use the pull chains or a remote control for the
>> >> fan and
>> >> light? I suggest that you go with wall switches as frequent pulling
>> >> on the chains can wear out those switches prematurely and to pay
>> >> someone to replace
>> >> them might add up to the cost of the fan. The wall switches are good
>> >> if you decide to get rid of the fan in the future and install a
>> >> regular light
>> >> fixture instead. If you decide to have one wall switch for the fan
>> >> and light kit you will be going forth and back between the pull chain
>> >> and wall switch to shut the light off and leave the fan on.
>>
>> >> Since there is no access for the living room, some holes will need to
>> >> be
>> >> made in the ceiling and wall so that wiring can be installed. Will
>> >> you be making the necessary patches to these holes or do you want the
>> >> electrician
>> >> to do it? Are you going to be responsible for repainting the walls
>> >> and ceiling after the holes have been patched or do you want the
>> >> contractor to do it?
>>
>> > Hi John,
>>
>> > To answer your question, the fan I want has lights built in to it, it
>> > isn't a kit or anything. The fans, which are both the same come with
>> > remote controls. Does this mean I don't need a wall switch?
>> > Shouldn't the remove me enough? The fans I am getting are really high
>> > quality fans and look really good, I doubt we will replace them before/
>> > if we ever move.
>>
>> > This was a question I wanted to ask. Do electricials repair that
>> > drywall for the damage that is done when peforming the job? How is
>> > this normally repaired?
>>
>> > So guys, thanks for the response. I am in the middle of getting more
>> > quotes. It seems like there is some agreement that 253 for no pre
>> > existing wiring, with access through a attic crawlspace is too much.
>>
>> > I am correct in this assumption?
>>
>> > John
>>
>> Where do you live? That estimate is not that far off where I come from.
>> Now if you live in the Ozarks then yes it would be off. You could expect
>> a 100.00 estimate from someone in that region. I wonder how many here
>> giving their advice are weekend warriors or qualified electricians?
>>
>> --
>> "You can lead them to LINUX
>> but you can't make them THINK"
>> Running Mandriva release 2008.0 free-i586 using KDE on i586
>
> I live near Lexington Kentucky. If $253 for no pre exisiting wiring
> is on par with a crawl space, how much for no crawl space. The
> downstairs living room has the master bedroom above it.

Much more I'm afraid. But not knowing the layout I would not even think
about giving you an estimate without seeing it. Living where you live I
would think you now can get it for cheaper by maybe 100.00 cheaper.

--
"You can lead them to LINUX
but you can't make them THINK"
Running Mandriva release 2008.0 free-i586 using KDE on i586

Posted by HeyBub on June 25, 2008, 8:11 pm
Johndagolfer@gmail.com wrote:
>
> I live near Lexington Kentucky. If $253 for no pre exisiting wiring
> is on par with a crawl space, how much for no crawl space. The
> downstairs living room has the master bedroom above it.

The cost could vary. If you can stand a conduit run up the wall and across
the ceiling, that's not a big expense. If, on the other hand, you have to
hire the guy with the longest drill bit in Kentucky - to bore through the
joists holding up the bedroom - he might charge a lot for travel.



Posted by John Grabowski on June 26, 2008, 8:24 am

>>
>>
>>
>>
>> > Hi all,
>>
>> > I need to hire an electrician to install 2 ceiling fans in my house.
>>
>> > Master bedroom: There is access in a crawlspace for this room through
>> > the closet access panel
>> > Living room: There is no access here.
>>
>> > Both rooms appear to not have any preexisting hook ups.
>>
>> > Not including the fan how much should this job cost?
>>
>> > For just the master I have been quoted 253 labor only and probbably
>> > much more for the downstairs.
>>
>> > What do you guys think?
>>
>> I'm assuming that there is no existing wiring in place. There are a few
>> variables to consider. Will the fans also have light kits? Do you want
>> a
>> separate wall switch for the fan and one for the light kit? If so do you
>> want a dimmer for the light kit? Would you prefer to not have any wall
>> switches and just use the pull chains or a remote control for the fan and
>> light? I suggest that you go with wall switches as frequent pulling on
>> the
>> chains can wear out those switches prematurely and to pay someone to
>> replace
>> them might add up to the cost of the fan. The wall switches are good if
>> you
>> decide to get rid of the fan in the future and install a regular light
>> fixture instead. If you decide to have one wall switch for the fan and
>> light kit you will be going forth and back between the pull chain and
>> wall
>> switch to shut the light off and leave the fan on.
>>
>> Since there is no access for the living room, some holes will need to be
>> made in the ceiling and wall so that wiring can be installed. Will you
>> be
>> making the necessary patches to these holes or do you want the
>> electrician
>> to do it? Are you going to be responsible for repainting the walls and
>> ceiling after the holes have been patched or do you want the contractor
>> to
>> do it?
>
> Hi John,
>
> To answer your question, the fan I want has lights built in to it, it
> isn't a kit or anything. The fans, which are both the same come with
> remote controls. Does this mean I don't need a wall switch?
> Shouldn't the remove me enough? The fans I am getting are really high
> quality fans and look really good, I doubt we will replace them before/
> if we ever move.


*Using only the remotes makes the installation easier. Tell the
electricians giving you estimates that you don't want wall switches.


>
> This was a question I wanted to ask. Do electricials repair that
> drywall for the damage that is done when peforming the job? How is
> this normally repaired?


*Some electricians will make repairs and some don't. This could add a lot
more to the cost as it usually takes more than one visit to completely
finish the patch job on the drywall. Another visit would be required for
painting. If the electrician won't make repairs then you will need to hire
someone to do that.


>
> So guys, thanks for the response. I am in the middle of getting more
> quotes. It seems like there is some agreement that 253 for no pre
> existing wiring, with access through a attic crawlspace is too much.
>
> I am correct in this assumption?


*No. Every market is different. You need to get multiple estimates to
determine who is high and who is low.



Page 3 of 5       < 1 2 3 > last >>
Similar ThreadsPosted
Replacing and installing ceiling fans in an exposed indoor ceiling beam January 14, 2006, 9:11 pm
Vaulted Ceiling--Installing Ceiling Fans July 31, 2005, 1:24 am
Installing ceiling fan from an angled ceiling September 5, 2005, 2:53 am
Installing a new ceiling fan. May 14, 2006, 9:45 pm
Installing a ceiling fan August 8, 2006, 10:23 am
Need help installing a ceiling fan November 21, 2008, 11:42 am
Installing ceiling fan with 10" joists June 4, 2007, 6:34 pm
Installing Ceiling Light Fixture April 8, 2006, 7:09 pm
Installing a ceiling fan in a light fixture August 10, 2006, 12:31 pm
Installing a ceiling fan remote receiver into wall October 1, 2005, 9:16 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap