|
Posted by autonut843 on June 26, 2006, 6:23 pm
I think you should try a different light kit, one that only shines
down. Or, maybe you could experiment with a piece of masonite, cut it
like a donut and see how that does. When you have the diameter that
works, make the donut out of metal (think ductwork) so it is not a fire
hazard from the heat of the bulb. That's how I'd attack the problem.
Another option would be to just abandon the light kits with the fans
and install 10 lights between the fans, mount the lights on down-rods
so the lights are only shining down and are on the same plane as the
fan blades.
Or, add some lights that shine UP that fully illuminate the ceiling
BRIGHTER than the light that goes up through the fan blades so the
disco light that filters through the blades is washed out by that new
light. Again, these light fixtures would probably want to be mounted
about the same height as the fans. You could experiment with this
option by using your halogen work lights and temporarily placing them
on ladders, etc. and directing them to see how best to wash out the
disco effect. I would definitely experiment with the halogens before
investing any more in additional fixtures. If the temporary work
lights fix the problem you will know how to proceed.
coordinator wrote:
> We put in 10 Hunter fan light units model # 20765 in our church
> auditorium and they look
> great, but when the fans & lights are on together it looks like a disco
> room. Is there a shield or something else we could use to keep the
> light from going up in to the fan blades.
> Any "HELP" would be greatly appreciated
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap