If you were Registered and logged in, you could reply and use other advanced thread options
|
Posted by Elle on December 4, 2008, 2:03 pm
I would rather not pour concrete. Is there anything else I
can use to fill in the hole around the shower drain pipe
shown in the photos at site
http://honda.lioness.googlepages.com/showerdrain ? Any other
suggestions for remedying this as professionally as
possible?
The (Aqua Glass) shower pan cracked so I am replacing it.
The main cause seems to be simply that the floor beneath it
was neither solid nor level.
|
|
Posted by Mike S. on December 4, 2008, 5:27 pm
Why not use concrete? It's cheap, simple to mix a bag or two in a plastic
tub, and it will work fine.
If you really can't use concrete for some reason then I'm sure you could use
3 part epoxy floorpatch,( resin, hardener, and sand) we use that at work to
patch warehouse floors that stand up to forklift traffic, but why spend a
fair amount of extra money for something when the cheap simple solution
would do fine?
--
Mike S.
>I would rather not pour concrete. Is there anything else I can use to fill
>in the hole around the shower drain pipe shown in the photos at site
>http://honda.lioness.googlepages.com/showerdrain ? Any other suggestions
>for remedying this as professionally as possible?
>
> The (Aqua Glass) shower pan cracked so I am replacing it. The main cause
> seems to be simply that the floor beneath it was neither solid nor level.
>
|
|
Posted by Big_Jake on December 4, 2008, 7:37 pm
> I would rather not pour concrete. Is there anything else I
> can use to fill in the hole around the shower drain pipe
> shown in the photos at sitehttp://honda.lioness.googlepages.com/showerdra=
in? Any other
> suggestions for remedying this as professionally as
> possible?
>
> The (Aqua Glass) shower pan cracked so I am replacing it.
> The main cause seems to be simply that the floor beneath it
> was neither solid nor level.
Any hard floor leveler, such as Jiff Set, but concrete is still
cheaper.
JK
|
|
Posted by Joe on December 4, 2008, 7:48 pm
> I would rather not pour concrete.
Get over it. Nothing else will perform as well for the price.
After you get a grip, take the time to plan what you need and you
won't feel overwhelmed by the task. For openers, the better materials
are premixed, like Sakcrete. The bag sizes vary from store to store,
so go look at some and note the weight (can you deal with an 80 lb.
bag, for example?). Note the volume, so you can calculate what you
need. Look at mixing containers, such as large plastic tubs (kitty
litter box, maybe) or even the small mortar or drywall mud mixing
containers with convenient sloping sides. See the short handled hoes
that are used with the mixing box. Look at trowels, scoops, stuff like
that. Consider firming up your substrate with serious tamping. Cheap
tamping tools can be had if you can't improvise. For a large volume
concrete mix would serve well, allowed to cure and topped off to
smoothness by mason mix. Or all mason mix for a small volume. Plan
ahead as to where you want to clean your equipment for later use. A
remote part of the yard or garden is good, Have a bucket of water
handy for mopping up, etc. Ask around and see if there isn't a friend
or two that has some familiarity with projects like this.
You can do it, so have at it and enjoy the results. Good luck.
Joe
|
|
Posted by Elle on December 5, 2008, 7:34 pm
Mike, Jake, and Joe, you all are right. I am over it and
will give the concrete a shot weekend. Thank you for the
input.
|
| Similar Threads | Posted | | Shower Drain Strainer Won't Fit, Part II -- How to Remove a Small Length of a Drain Pipe? | February 6, 2007, 9:57 pm |
| Shower Drain Pipe help | February 17, 2007, 6:54 pm |
| Oil Fill Pipe Question | February 11, 2008, 12:14 pm |
| Basement Tub Drain to Shower Drain Question | March 12, 2006, 3:28 pm |
| Best brand Toilet Fill pipe na Ballcock | August 18, 2005, 2:14 am |
| Plumbing question: getting piece of broken pipe out of drain pipe | October 21, 2006, 3:01 pm |
| Shower Drain | June 24, 2007, 5:32 pm |
| Intermintent Shower Drain | May 31, 2006, 10:33 am |
| stinky shower drain | June 28, 2006, 11:24 am |
| shower drain to long | November 21, 2006, 9:20 pm |
|
|