|
Posted by Al Bundy on June 16, 2007, 3:53 pm
> Al Bundy wrote:
>>
>>
>>>Bgreer5050 wrote:
>>>
>>>>What size of roll flashing would you recommend between the porch
>>>>roof and the siding on this elevation?
>>>>
>>>> http://mropartner.com/frontelevation.htm
>>>>
>>>>
>>>
>>>I don't know about "roll flashing". I am not familiar with
>>>that term. I would use wall angle at that juncture. I like
>>>to have mine custom made and I have it bent with 6" exposed
>>>and 6" up the wall. Cover the wall side with Ice and water
>>>shield sealing the felt or housewrap over the flashing. This
>>>seals any nail holes that you have to make through the siding
>>>and through the flashing.
>>>
>>
>>
>>
>> Gonna have to do a very similar area (first pic) myself when I finish
>> the main body roof.
>>
>> Believe he is talking about the flashing material that comes on a
>> roll various widths 10/14/20",etc. Stuff you bend yourself. I've seen
>> it in aluminum and galvanized.
>
> Around here we call that valley flashing or coil stock.
'round here too.
>
>> Haven't seen it myself but online it seems the Borg has Roll Stock
>> Vinyl Flashing. Anyone ever use it? Pros or cons?
>
> Would never use vinyl anywhere that is in the sun or needs to
> be protected from water intrusion.
That just about leaves indoor use only...
>
>> Never dealt with putting it on a house with vinyl siding. I know
>> there's a tool to pull siding. What about that bottom piece where the
>> siding meets the roof? Nailed in?
>
> All vinyl siding is nailed loosely (or should be). I have
> never had a problem removing it or getting it back on. Just
> use a flat bar.
>
Thanks for the reply...
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap