Flat Top Stove

Posted by Rick on January 11, 2006, 7:09 am

Hey all. Just a general question about Flat Top stoves with hidden
burners. I had my house built in 97. My wife and I were looking at
Flat Top stoves to replace the gas one we currently have. Seeing that
all these stoves are 220 and I only have a 110 out let where the stove
is at, what would the approximate cost be to install a 220 circuit to
accomodate this type of stove?
TIA

Posted by Stubby on January 11, 2006, 8:25 am

Rick wrote:
show/hide quoted text
You must speak with an electrician in your town.

Posted by Bob on January 11, 2006, 8:39 am

No one in a newsgroup can tell you this. Get an electrician to come to your
home. They probably won't charge you for an estimate.
show/hide quoted text

Posted by tinacci336 on January 11, 2006, 10:05 am

The cost of putting a 40-50 amp circuit breaker in in electic panel (if
space avaialable) and running #10 cable to stove area and the
connection outlet plus the cost of labor involved unless you know what
your doing and YDIY,

Posted by Doug Kanter on January 11, 2006, 11:12 am

show/hide quoted text
Side issue: Have you thoroughly investigated whether your utensils can be
used with one of these cooktops? You might need to factor in some more
money.

Page 1 of 4 1 2 3 > last >>

Similar Threads	Posted
Is this a round or flat wood stove gasket?	November 26, 2005, 5:11 pm
Cleaning Flat electric stove tops?	November 16, 2009, 11:36 am
Does Fix a Flat work?	August 24, 2005, 3:46 am
Too flat for shingles?	October 10, 2005, 12:30 pm
Eggshell or Flat for LR	December 1, 2005, 9:48 am
New Flat under construction...	February 10, 2006, 10:18 am
what's my flat roof?	May 28, 2006, 6:29 am
Wheelbarrow tire goes flat	July 13, 2005, 4:19 pm
Flat roof problems	August 29, 2005, 1:49 pm
Flat work guess	October 15, 2005, 9:18 am