Home Page link

Florida Building Code - T&G Ceilings?????

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Florida Building Code - T&G Ceilings????? infiniteMPG 07-16-2008
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by infiniteMPG on July 16, 2008, 1:08 pm
Does anyone know the Florida Building Codes well enough to know if you
put up tongue & groove pine panelling for the ceiling, do you need a
layer of sheet rock on top to be a fire barrier or can you fasten the
T&G directly to the joists? Or maybe just a dust barrier sheet and
then the T&G? Trying to muddle thru the Florida Building Code and
can't find anything specific to that.

http://www2.iccsafe.org/states/Florida2007FinalDraft/residential/Residential07_Frameset.htm

Thanks!!!

Posted by on July 16, 2008, 1:23 pm
On Wed, 16 Jul 2008 10:08:14 -0700 (PDT), infiniteMPG

>Does anyone know the Florida Building Codes well enough to know if you
>put up tongue & groove pine panelling for the ceiling, do you need a
>layer of sheet rock on top to be a fire barrier or can you fasten the
>T&G directly to the joists? Or maybe just a dust barrier sheet and
>then the T&G? Trying to muddle thru the Florida Building Code and
>can't find anything specific to that.
>http://www2.iccsafe.org/states/Florida2007FinalDraft/residential/Residential07_Frameset.htm
>Thanks!!!


If this is not the ceiling of a garage with living space above or some
kind of multifamily building, you do not need fire separation.

Posted by infiniteMPG on July 16, 2008, 2:39 pm
> If this is not the ceiling of a garage with living space above or some kind of
multifamily building, you do not need fire separation.

Good to hear. Would there be any restrictions on what type of
sheeting we put between the T&G and the joists if we wanted to create
a good barrier for air and dust? Was thinking of heavy poly sheeting
or maybe even roofing paper but not sure if that's wise on the
interior.

THANKS!!!


Posted by on July 16, 2008, 9:10 pm
On Wed, 16 Jul 2008 11:39:03 -0700 (PDT), infiniteMPG

>> If this is not the ceiling of a garage with living space above or some kind
of multifamily building, you do not need fire separation.
>Good to hear. Would there be any restrictions on what type of
>sheeting we put between the T&G and the joists if we wanted to create
>a good barrier for air and dust? Was thinking of heavy poly sheeting
>or maybe even roofing paper but not sure if that's wise on the
>interior.
>THANKS!!!
There are other considerations beyond fire rating. What are you doing
for a vapor barrier?
Tyvec may be an answer

Posted by infiniteMPG on July 21, 2008, 12:53 pm


Just as an update, we tore the whole dropped ceiling out Saturday,
then stared at it Sunday and decided that T&G would end up being about
$750 in just materials and sheet rock was about $60 (and half the
kitchen was not drop ceiling so was already done) and we back away
from the T&G idea and actually got all the sheet rock up for the new
ceiling Sunday. Appreciate the help!!!

Similar ThreadsPosted
office building bathroom tile building code October 18, 2005, 1:56 pm
Massachusetts Building Code November 4, 2007, 3:10 pm
Building Code, Michigan November 1, 2007, 6:08 pm
Building Code Inspectors - Survey November 17, 2005, 7:29 am
Building code for Decks - Newfoundland May 14, 2007, 2:25 pm
new york state building code faq February 22, 2008, 9:36 pm
Question about building code and walls in basement... January 30, 2006, 9:16 am
Is there a building code for use of Backerboard in shower installations for new constructions? February 26, 2006, 6:48 pm
Building code - mechanical door/utlity room December 16, 2008, 9:42 pm
Tampa Bay Florida January 15, 2007, 10:47 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap