Home Page link

Framing wooden walls in basement?

Home| Search | About
Login Password
Register Now! Lost Password?

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 1 of 2       1 2 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Framing wooden walls in basement? Borrall Wonnell 01-12-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Borrall Wonnell on January 12, 2007, 11:30 am


A couple of questions about framing interior walls in the basement:

On either end the basement, joists are more than 1' away from the
concrete wall. Is it possible to attach a stud wall adjacent to the
concrete wall (ignoring proper insulation practices, for now)? How is
this done?

I have a similar question for walls that are perpendicular to the
joists. If the joists are uneven, won't there be difficulty nailing
the top plate of the stud wall into the joist?

Go easy, I'm new to this stuff and I'm just looking for design ideas.

Cheers,
Dave


Tankless Water Heaters 468x60
Posted by professorpaul on January 12, 2007, 11:59 am


I had a similar situation with a vacation house that was built into the
side of a hill. The concrete wall was only on the hill side, and the
rest was framed in - acutally used 2x3, as there was no load on this
wall. I first put up about 1" bead board as insulation, then framed up
against that. I simply anchored the sill with concrete nails (just to
keep it from kicking out). At the top, I hooked into the rafters. It
was actually "free standing," and there was no flex. I then put dry
wall over that, and then paneling. Wiring of course went in before the
dry wall/paneling. The span might have been around 15', if I recall
correctly.

Others may have their opinions.


Posted by tbasc@bellsouth.net on January 12, 2007, 12:05 pm



Borrall Wonnell wrote:
> A couple of questions about framing interior walls in the basement:
>
> On either end the basement, joists are more than 1' away from the
> concrete wall. Is it possible to attach a stud wall adjacent to the
> concrete wall (ignoring proper insulation practices, for now)? How is
> this done?
>
> I have a similar question for walls that are perpendicular to the
> joists. If the joists are uneven, won't there be difficulty nailing
> the top plate of the stud wall into the joist?
>
> Go easy, I'm new to this stuff and I'm just looking for design ideas.
>
> Cheers,
> Dave

Nail extra pieces (bridging) between the end joists and attach top
plate to that.
Nail (sister) extra pieces to the face of existing joists to give a
level surface to attach top plate.
TB


Posted by on January 12, 2007, 2:14 pm


Consider using the steel ones since it's a basement. I would rather
use something that potentially rusts over something that could
potentially rot if you ever get water problems.


Posted by Borrall Wonnell on January 15, 2007, 8:34 am



> Nail extra pieces (bridging) between the end joists and attach top
> plate to that.
> Nail (sister) extra pieces to the face of existing joists to give a
> level surface to attach top plate.
> TB

Neat. This may very well work, but I'll have to check if there's
something for me to nail the bridging pieces to. Right now, that area
is hidden by a vapour barrier and fiberglass insulation. At the
basement 'ceiling', the vapour barrier extends from the concrete wall
to the joist, where it is stapled/glued in place. I can't see beyond
that due to the insulation.

As for nailing sister pieces to joists, that sounds like a fine idea,
as some of the joists are at a visibly different height in the center
of the basement (I'd estimate 0.5" - 0.75"). This may not be a problem
at the concrete wall, since all the joists *should* be at the same
level. I haven't measured yet.

Sorry, no pics. I'm technologically inclined, but not technologically
endowed.

Cheers,
Dave


Page 1 of 2       1 2 > last >>
Similar ThreadsPosted
framing basement walls August 11, 2006, 12:48 am
Finishing off a basement - framing walls question April 4, 2006, 12:09 pm
basement framing Q January 7, 2006, 9:23 am
Basement Finishing - Framing Ledge November 5, 2007, 2:09 pm
framing basement with 2x3's...PT baseplate??? March 6, 2007, 3:51 pm
How can I fix 2 pounds heavy plaster plaques to a painted wooden wall? (Those thin wooden panels that they had in the 70s) November 4, 2007, 10:48 pm
insulating basement walls June 17, 2006, 11:11 pm
Wet Insulation in Basement Walls August 5, 2006, 12:22 pm
Basement leaks from walls September 1, 2006, 12:57 am
Insulating Basement Walls November 30, 2006, 7:56 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap