Home Page link

Furnace not igniting (Comfortmaker RPJ II - electronic igniter)

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 7 of 8       < 1 2 3 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Furnace not igniting (Comfortmaker RPJ II - electronic igniter) sanmateof 10-27-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Oscar_Lives on October 30, 2006, 10:41 pm



<Al Moran> wrote in message
> wrote:
>
>>Oscar_Lives posted for all of us...
>>
>>> Thanks Paul. I had to pull out my Minion card and make sure it was
>>> up-to-date with the current validation.
>>>
>>Does it have those little shiny whoreographics on it? You might need the
>>X-ray
>>specs to see them.
>
>
> not if it's a hollygram.


Hell, I didn't even get a Tellygram!

The X-ray specs didn't work too well either. I wore them to the last Minion
Convention and told Paul: " I always knew your were crazy, but now I can
see your nuts!"



Real Goods Solar, Inc.
Posted by =?iso-8859-15?Q?Tekkie=AE?= on October 30, 2006, 9:28 pm


MLD posted for all of us...

> Hey meathead--you're not in the HVAC group. Your crap doesn't fit
> here--save it for the sink hole you like to live in.
> MLD
>
>
What does MLD stand for? HMMM Major League Dipshit?
--
Tekkie Don't bother to thank me, I do this as a public service.

Posted by =?iso-8859-15?Q?Tekkie=AE?= on October 30, 2006, 9:15 pm


Tony Hwang posted for all of us...

> What is trouble code?
>
Tony, what is your code to go away?
--
Tekkie Don't bother to thank me, I do this as a public service.

Posted by daytona on October 27, 2006, 9:31 pm


Need MODEL number

>I have a Comfortmaker RPJ II gas furnace with an electronic igniter (no
> standing pilot light). The furnace and the fan come on when signaled by
> the thermostat but the furnace does not light. No flames come out of
> the burners. I've tested this with two different thermostats thinking
> our old thermostat was not turning on the furnace. But you can hear it
> come on. Any ideas what else would keep the burners from lighting/ not
> igniting? or what the problem may be? There is no smell of gas. Any
> help would be appreciated. Thanks.
>



Posted by Noon-Air on October 27, 2006, 9:33 pm



>I have a Comfortmaker RPJ II gas furnace with an electronic igniter (no
> standing pilot light). The furnace and the fan come on when signaled by
> the thermostat but the furnace does not light. No flames come out of
> the burners. I've tested this with two different thermostats thinking
> our old thermostat was not turning on the furnace. But you can hear it
> come on. Any ideas what else would keep the burners from lighting/ not
> igniting? or what the problem may be? There is no smell of gas. Any
> help would be appreciated. Thanks.
>
when was the last time you had it checked and serviced??



Page 7 of 8       < 1 2 3 > last >>
Similar ThreadsPosted
Gas range spark igniter not igniting January 21, 2007, 11:02 pm
Old Carrier furnace: spark igniter September 30, 2005, 3:30 pm
Furnace: Igniter glows, but no pilot March 19, 2006, 12:40 am
Furnace igniter clicking all the time December 28, 2007, 4:00 pm
Where is the igniter of a weather king furnace February 16, 2008, 1:01 pm
Electronic Furnace Filters June 18, 2006, 7:54 am
Generators and Electronic Furnace Controllers December 4, 2006, 5:43 pm
Electronic air clean furnace wire broken November 18, 2005, 9:13 pm
Furnace Electronic Fuse blew, odd circumstances. February 20, 2006, 9:08 am
GE Oven igniter bar November 29, 2006, 1:08 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap