|
Posted by Pete C. on June 12, 2008, 6:24 pm
The Ranger wrote:
>
> I am stunned as yet another of my GE profile appliances fail.
>
> This is a GE Profile Double-Oven, installed in 2000, model #
> JT950WDA2WW.
>
> As I fired up the self-cleaning cycle for the upper oven, it
> locked down the oven door and set the time to 4 hours. All was
> good until the oven clicked over to the 2 hour mark. Everything
> shut down and it's alarm claxton started sounding. The error
> message is "F2" and clearing it doesn't help. I've resorted to
> flipping the breaker.
>
> Can someone please provide some assistance with why the oven
> shut down and how to prevent it from happening again? (Beyond
> not running the self-clean.)
>
> The Ranger
http://www.geappliances.com/service_and_support/
http://products.geappliances.com/ProdContent/Dispatcher?REQUEST=SKUOBJECTS&DOCUMENT=Use%20and%20Care%20Manual&SKU=JT950WAWW
http://www.geappliances.com/search/fast/infobase/10009792.htm
Range - Oven Error, Fault or Function Codes
"F2 For an unknown reason, the oven temperature has exceeded a preset
threshold."
So basically the temp overshot and tripped the safety limit.
“F— and a number or letter” flash in the display.
You have a function error code.
• Press the CLEAR/OFF pad. Allow the oven to cool for
one hour. Put the oven back into operation.
If the function code repeats.
• Disconnect all power to the oven for at least 30
seconds and then reconnect power. If the function
error code repeats, call for service.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap