GE Profile Washing machine problem...

Posted by Brigitte on November 13, 2005, 1:45 pm

Hi Group,
Not sure this is the right group for this question, if it isn't please point
me in the right direction.

I purchased the above-mentioned washing machine approximately 6 years ago.
I've had no problems with it until today. It was in the middle of a wash
cycle when there was a loud bang that sounded like something heavy fell in
the laundry room.

I opened the lid to the washer and it was still agitating, but the center
agitator was tilting way over to one side. The machine will still operate,
but it's very noisy and that agitator is leaning badly, so I turned off the
machine.

Any idea what the problem could be? Is this an expensive/difficult fix?

Is it time to buy a new front loading machine? ;))

Any helpful input is appreciated.

Thanks in advance,
Brigitte

Posted by Ed on November 13, 2005, 3:23 pm

> Is it time to buy a new front loading machine? ;))

Yes, if that's what you really want.
http://www.estateappliances.com/shopping/Specs.asp?Model=TAWS750P&Appliance=10100&BaseModel=TAWS750P&SpecModelNo=TAWS750PQ
$329, it's all you need.

Posted by Brigitte on November 13, 2005, 10:49 pm

> > Is it time to buy a new front loading machine? ;))

> Yes, if that's what you really want.

http://www.estateappliances.com/shopping/Specs.asp?Model=TAWS750P&Appliance=10100&BaseModel=TAWS750P&SpecModelNo=TAWS750PQ

> $329, it's all you need.

That's a top-loading machine, but thanks :)

Brigitte

Posted by Appliance Repair Aid on November 13, 2005, 4:23 pm

Hi,

> GE Profile Washing machine

Not a model# !

http://www.applianceaid.com/model.html
Some model# helps.

> I opened the lid to the washer and it was still
> agitating, but the center agitator was tilting way over > to one side**

The whole tubs are leaning to one side?

jeff.
Appliance Repair Aid
http://www.applianceaid.com/

Posted by Brigitte on November 13, 2005, 10:47 pm

> Hi,

> > GE Profile Washing machine

> Not a model# !

I don't know where to find the model #...

> http://www.applianceaid.com/model.html
> Some model# helps.

> > I opened the lid to the washer and it was still
> > agitating, but the center agitator was tilting way over > to one side**

> The whole tubs are leaning to one side?

Yes, the whole tub is leaning to one side.

> jeff.
> Appliance Repair Aid
> http://www.applianceaid.com/

Page 1 of 3 1 2 3 > last >>

Similar Threads	Posted
GE Profile Washing Machine	April 22, 2009, 1:41 am
GE Profile washing machine model WPRB8050	November 13, 2009, 2:49 pm
Washing machine problem	August 11, 2005, 1:30 am
Washing Machine Problem	August 9, 2006, 10:29 pm
washing machine problem	August 19, 2006, 5:38 pm
Washing Machine Problem	September 16, 2006, 7:54 pm
Washing Machine Problem	August 23, 2007, 1:27 pm
Problem with washing machine	June 30, 2008, 3:53 pm
Washing machine draining problem	November 28, 2005, 1:48 pm
Washing Machine Vibration Problem	December 18, 2006, 8:46 am