|
Posted by Al Bundy on July 7, 2006, 12:44 am
> A. Pismo Clam wrote:
>> Hello All,
>>
>> Since we do not have the room in our attic [or our hallway] to mount
>> a whole house fan, we have decieded that we should go with one of
>> these fans. Since we are doing this ourselves and very new to this,
>> we are asking for your help, please! Today, we are about 104 degrees
>> by our outdoor thermometer.
>>
>> Our home faces north. As a consequence the east side of the house
>> gets the sun first. We have two static attic vents, one at each end
>> of the home as well as several vents at the eaves. So here are my
>> questions:
>>
>> [here's the link]
>> http://www.bvc.com/products/cool/gablemount/cx1600.html
>>
>> When we mount one of these attic fans should we place it on the east
>> end of the house, bringing in cool air from the west side of the
>> house, or should we mount the fan on the west side of the house,
>> thereby exhausting the hot air already in the attic?
>>
>> By the way, they have a 2.1 amp PSC attic fan that really sounds
>> great. However, what does "PSC" mean.
>>
>> Many thanks for taking the time to respond!
>>
>> Norm & Loretta
>
> Do you want to use this as a whole house fan or just an attic fan
> to try
> and reduce the heat in an unoccupied attic?
>
> If the first, you have the wrong fan and it will do very little.
> If the
> second I suggest that proper passive (no fans) venting is usually far
> better as there is little difference in real results of a active or
> passive system, assuming they were both well designed and the passive
> is maintenance free, energy free and silent.
>
>
Hey Joseph:
I don't understand how a fan would not be better. Moving 1600 cfm of
super heated air from an attic has got to help. I'll agree it isn't going
to drop the indoor temp 5 deg but moving 1600 (or even 1200 accounting
for inefficiencies) has got to be a good thing for at least the shingles.
|