Home Page link

Garage Floor Finish

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 1 of 2       1 2 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Garage Floor Finish John Hayes 03-06-2007
---> Re: Garage Floor Finish heisershomemaintenance03-06-2007
| `--> Re: Garage Floor Finish heisershomemaintenance03-06-2007
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by John Hayes on March 6, 2007, 8:29 pm


What is a good sealer/finisher for a concrete garage floor, And what
prep is recommended. Thanks!


PexSupply QuikTrak 468x60
Posted by on March 6, 2007, 9:42 pm


> What is a good sealer/finisher for a concrete garage floor, And what
> prep is recommended. Thanks!

epoxy 2 part is the best but has a lot of fumes,very durable


Posted by on March 6, 2007, 10:36 pm


On Mar 6, 6:42 pm, heisershomemaintena...@gmail.com wrote:
>
> > What is a good sealer/finisher for a concrete garage floor, And what
> > prep is recommended. Thanks!
>
> epoxy 2 part is the best but has a lot of fumes,very durable

acid etching the concrete does lift out loose debris and most oil
residue but if not rinsed well enough will keep anything from
adhearing to it, there is a citrus acid i strongly recomend you can
find at lowes, homedepot, and some hardware stores, get a good stiff
bristled brush scrub the cleaner in, in about a 5'x5' area rinse and
do the next 5x5 etc... try to keep it clean as it dries and you can go
by its apperance or you can do the moisture test tape a piece of
plastic down on the floor
if there is know moisture within2-4 hours you'll be good, note; some
epoxy's dry very quick depending on the ambient temp. stay busy
have fun.
howell mi.


Posted by J.A. Michel on March 6, 2007, 10:52 pm



> What is a good sealer/finisher for a concrete garage floor, And what prep
> is recommended. Thanks!
>
I did the Rustoleum Professional solvent-based epoxy on my garage floor. I
prepped with a strong muratic acid wash, then let dry for a few days prior
to application. Wear a respirator when applying this stuff, the fumes are
nasty. The water-base epoxy is cheaper and doesn't have the issues with
fumes, but it is less durable than the solvent base epoxy.

I also applied the clear-coat as well. I have found this epoxy to be very
durable. Car tires are not an issue.


Posted by Joseph Meehan on March 7, 2007, 10:46 am


John Hayes wrote:
> What is a good sealer/finisher for a concrete garage floor, And what
> prep is recommended. Thanks!

The best is the one that was put on while following the prep
instructions exactly. All others are junk!

After that I would look for a two part epoxy.

--
Joseph Meehan

Dia 's Muire duit




Page 1 of 2       1 2 > last >>
Similar ThreadsPosted
Floor finish April 30, 2007, 9:03 am
Garage wall finish? December 1, 2007, 4:25 pm
Order in which to finish off my garage... July 29, 2008, 2:46 pm
Finish for new pine floor October 19, 2005, 10:42 am
Damaged Floor Finish September 15, 2005, 2:21 pm
hardwood floor finish December 20, 2005, 9:31 pm
Shellac Floor finish? April 10, 2006, 1:44 pm
wood floor finish? October 14, 2006, 4:12 pm
hardest floor finish November 11, 2006, 12:09 pm
Preserve finish on garage doors? September 5, 2006, 5:12 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap