|
Posted by buffalobill on July 10, 2006, 7:02 pm
maybe replacement? cost around $25 such as:
http://www.amazon.com/gp/product/B00006K012/104-7668383-4307903?v=glance&n=228013
Bill wrote:
> A couple of months ago I posted about a problem getting my Overhead Door
> remote to stay adjusted. It is a single button 360mhz version.
> The problem centered around the tuning slug being loose and suggestions here
> included adding a piece of rubber band and also threaded wax.
> Now the remote works if I adjust the slug each time while holding down the
> button. Funny part is it doesn't hold the new adjustment.
> Every time I use it I must "re-tune" it and not always in the same
> direction. It varies in CW and CCW and degrees of turn.
>
> Now I notice on the pc board an adjustment button marked "Learn". This makes
> me think a programming method might apply to keep the tuned slug to one
> frequency. What do you think?
> Bill
>
>
>
> --
> Bill W.
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap