Home Page link

Gas oven burner not working

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 2 of 3       < 1 2 3 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Gas oven burner not working cai3100 12-18-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by cai3100 on December 18, 2006, 2:45 pm


>
> Make and model please ?
>
> Is possibly just a clogged pilot or faulty ignitor.
>

I just found out by phone that it's a GE but she couldn't find where the
model number is. And, since it has electronic ignition, I was thinking that
the electronic ignition might be the problem. I didn't know they were
called igniters, but I started thinking maybe there is an igniter for each
burner and the one for the oven burner isn't working. And, I assume if the
igniter isn't working it automatically doesn't allow gas to flow through.

But, the good news is that an appliance repair person I know is on his way
there later this afternoon and I'm sure he'll figure it out. I'll post back
here what it turns out to be.

Thanks.



AppliancePartsPros.com, Inc.
Posted by Mark on December 18, 2006, 6:46 pm


10-to1 it's the ingnitor. That is generally the part that goes out in what
is called 'electronic ignition'. The cost of the part can very ($50-$100),
but it is fairly easy to replace.


>>
>> Make and model please ?
>>
>> Is possibly just a clogged pilot or faulty ignitor.
>>
>
> I just found out by phone that it's a GE but she couldn't find where the
> model number is. And, since it has electronic ignition, I was thinking
> that the electronic ignition might be the problem. I didn't know they
> were called igniters, but I started thinking maybe there is an igniter for
> each burner and the one for the oven burner isn't working. And, I assume
> if the igniter isn't working it automatically doesn't allow gas to flow
> through.
>
> But, the good news is that an appliance repair person I know is on his way
> there later this afternoon and I'm sure he'll figure it out. I'll post
> back here what it turns out to be.
>
> Thanks.
>



Posted by cai3100 on December 19, 2006, 11:15 am


> 10-to1 it's the ingnitor. That is generally the part that goes out in
> what is called 'electronic ignition'. The cost of the part can very
> ($50-$100), but it is fairly easy to replace.
>
Yep, that was it. The repair person charged $140 total to fix it.



Posted by cai3100 on December 19, 2006, 11:13 am


>
> Make and model please ?
>
It turned out to be a General Electric model GEXL44.

> Is possibly just a clogged pilot or faulty ignitor.
>
Yep, the repair person is replacing the ignitor.



Posted by Rich on December 18, 2006, 3:14 pm


cai3100 wrote:
> A friend has a kitchen gas range and oven and the burner for the oven
> stopped working. The top range burners all work, and the broiler gas
> burner works. But, just the oven burner is not working. There's no
> smell of gas. There is no pilot light -- it has electronic ignition.
> Sorry, I don't know the make and model number.
>
> Anyone happen to know what might be the problem? I'm trying to decide
> between calling an appliance repair person out to fix it or just
> buying a new one. If it's probably something simple that can easily
> be replaced, I'll go the repair person route.
>
> Thanks.

The number will be inside the door on the edge of the unit or on the front
of the unit when the storage/broiler is opened depending on the unit.

I would check the temp. probe that controllers the oven. It should read
about 1100 ohms when at room temp.

I just had this happen to me and everyone said it was the board so I spent
the $150 for the board and had the same problem did some more checking and
someone said check the temp probe and that was it. $39 dollar part!

So if you have a meter you can start where I wish I would have.

Rich




Page 2 of 3       < 1 2 3 > last >>
Similar ThreadsPosted
New England Roll Oven antique cook stove-Manor Cabinet 6 burner w/accessories-FOR SALE May 4, 2008, 7:43 am
My oven isn't working right.. November 5, 2006, 9:51 pm
Oven not working December 12, 2006, 10:01 pm
Amana oven quit working July 2, 2006, 11:58 am
Kenmore Electric Range - Oven & Burners Not Working - Repair Guide October 23, 2008, 2:53 pm
Re: Kenmore oven, oven/clock lights stay on. June 17, 2006, 2:17 am
strange issue: some plugs are working/ then not working June 16, 2006, 2:07 pm
Re: kitchen faucet not working but sprayer is working March 12, 2007, 6:19 pm
GE oven lower bake element burned thru replaced element no power to oven April 12, 2006, 3:26 pm
Gas burner July 12, 2006, 2:05 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap