Home Page link

Getting rusty nipple off.

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 2 of 5       < 1 2 3 > last >> Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Getting rusty nipple off. Mphilking 12-18-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by naked on the phone on December 18, 2006, 8:51 pm



Mphilking@adelphia.net wrote:
> I'm replacing the faucet on our shower/tub. The nipple is NOT budging.
> I used WD-40 and kind of stripped the threads in trying to get the
> nipple off. ANy suggestions? I don't want to use too much strength
> since the shower head is wiggling as I try to turn the nipple.

why is the shower head wiggling?


AppliancePartsPros.com, Inc.
Posted by naked on the phone on December 18, 2006, 8:51 pm



Mphilking@adelphia.net wrote:
> I'm replacing the faucet on our shower/tub. The nipple is NOT budging.
> I used WD-40 and kind of stripped the threads in trying to get the
> nipple off. ANy suggestions? I don't want to use too much strength
> since the shower head is wiggling as I try to turn the nipple.

why is the shower head wiggling?

you're just going to fuck it up anyway


Posted by on December 19, 2006, 8:54 pm



naked on the phone wrote:
> Mphilking@adelphia.net wrote:
> > I'm replacing the faucet on our shower/tub. The nipple is NOT budging.
> > I used WD-40 and kind of stripped the threads in trying to get the
> > nipple off. ANy suggestions? I don't want to use too much strength
> > since the shower head is wiggling as I try to turn the nipple.
>
> why is the shower head wiggling?
>
> you're just going to fuck it up anyway

Thanks for the support!


Posted by Edwin Pawlowski on December 18, 2006, 9:11 pm



> I'm replacing the faucet on our shower/tub. The nipple is NOT budging.
> I used WD-40 and kind of stripped the threads in trying to get the
> nipple off. ANy suggestions? I don't want to use too much strength
> since the shower head is wiggling as I try to turn the nipple.

Heat. If you can safely put a torch to the joint, that will usually break
it free.



Posted by on December 19, 2006, 8:55 pm



Edwin Pawlowski wrote:
> > I'm replacing the faucet on our shower/tub. The nipple is NOT budging.
> > I used WD-40 and kind of stripped the threads in trying to get the
> > nipple off. ANy suggestions? I don't want to use too much strength
> > since the shower head is wiggling as I try to turn the nipple.
>
> Heat. If you can safely put a torch to the joint, that will usually break
> it free.

A friend thinks it may be sodered on the back of the niple to the pipe.
I'm going to try another tool to remove it. Hopefully, that will
work. Thanks for advice!


Page 2 of 5       < 1 2 3 > last >>
Similar ThreadsPosted
Looking for straight nipple November 25, 2007, 8:48 am
Use of left/right nipple and coupling February 16, 2006, 6:13 pm
hot water heater corroded nipple September 3, 2005, 3:13 pm
Nipple Rings Used to Kill 853 Passengers March 29, 2008, 10:00 am
Plumbing: How to remove remaining piece of nipple from galv elbow April 30, 2006, 10:04 am
Rusty Roof April 11, 2007, 10:56 pm
Rusty Roof August 25, 2005, 5:32 pm
Rusty plier April 20, 2008, 1:48 am
Rusty Sink Fixture March 11, 2006, 3:42 pm
hot water suddenly rusty February 12, 2007, 9:35 am

Contact Us | Privacy Policy

XML SitemapXML Sitemap