|
Posted by Joe on May 28, 2007, 12:19 am
> I have about a dozen of concrete roof tiles that are cracked from heavy
> people walking on them so I got a few tubes of the RT-600 adhesives and try
> to glue them back together.
>
> My question is as I applied the adhesive on the back and cracked edges and
> put them back together the adhesive will be squeezed out of the joint to
> form a "bead". Should I wipe down the bead or should I leave the bead
> alone? Does it make a difference?
>
> I was wondering, would gorilla glue be a stronger adesive to use than the
> RT-600 roof tile adhesive?
>
> Thanks,
>
> MC
Far and away the best adhesive for concrete is a slow cure 2 part
epoxy. When you use it, the bead that squeezes out can be cleaned off
with acetone and will be nearly invisible. Then use any conventional
roof tile adhesive to set the repaired tile in place. HTH
Joe
| 
Yahoo! 
Google 
Windows Live 
del.icio.us 
digg 
Netscape 
XML Sitemap