Home Page link

Go-Kart engine problems (Briggs and Stratton)

Home Repair - - If it ain't broken, don't fix it. Otherwise look here. 

Page 3 of 2       < 1 2 Bookmark this page:  YahooMyWeb Yahoo!  Google Google  Windows Live Favorites Windows Live  del.icio.us del.icio.us  digg digg  Add to Netscape Netscape
Subject Author Date
Go-Kart engine problems (Briggs and Stratton) Gary H 07-07-2006
If you were  Registered and logged in, you could reply and use other advanced thread options
Posted by Gary H on July 7, 2006, 10:19 pm
>> > > After I got it all back together I started it up and it ran decently
>> > > for a
>> > > few hours. But then it started to run worse and worse. I bought a
>> > > new
>> > > carb for it and installed it tonight but it obviously wasn't the
>> > > problem.
>> > > Even with the new carb and with fresh gas it will only run with the
>> > > choke
>> > > all the way on. The new carb doesn't have an idle adjustment screw
>> > > so it
>> > > seems like it can't be a fuel problem. What else could it be? The
>> > > only
>> > > thing left is spark and compression. It obviously has both of those
>> > > because it runs and had plenty of power when it was running OK which
>> > > indicates compression is probably OK. I made sure the gas cap isn't
>> > > blocked.
>>
>> If it runs with the choke on, it must be not getting enough fuel. Have
>> you
>> checked
>> for intake leaks, loose carb, etc. Crud in the tank could have plugged a
>> carb
>> jet.
>
> Have you checked the fual line?
>

It doesn't have a fuel line. The carb sits on top of the tank. Its a brand
new carb so it doesn't seem like it would be clogged. Come to think of it,
it ran better with the old carb I took off.



Page 3 of 2       < 1 2
Similar ThreadsPosted
19.5HP Briggs & Stratton - Yardman Mower Engine Problems June 15, 2007, 9:24 am
briggs & stratton engine June 13, 2007, 4:23 pm
Briggs & Stratton Engine question. September 21, 2006, 3:07 pm
Briggs & Stratton Engine Problem April 16, 2008, 10:30 pm
WAS: Briggs & Stratton Engine Problem May 2, 2008, 12:37 pm
Re: old briggs and stratton engine model number March 28, 2007, 9:06 am
FINAL WAS: Briggs & Stratton Engine Problem May 20, 2008, 4:45 am
WAS: Briggs & Stratton Engine Problem (many weeks ago) October 12, 2008, 6:17 pm
Briggs & Stratton 16 HP engine-points actuating rod not moving enough ? November 5, 2005, 7:31 pm
Re: 12.5 HP Briggs and Stratton Engine on Sanapper Riding Mower May 7, 2006, 9:12 pm

Contact Us | Privacy Policy

XML SitemapXML Sitemap