HELP

Posted by on October 7, 2009, 11:33 pm

The formica vanity/sink in bathroom has seperated from wall, from 1/4"
to about 1/2" space. What to do?

Posted by dadiOH on October 8, 2009, 8:47 am

gloria212@webtv.net wrote:

> The formica vanity/sink in bathroom has seperated from wall, from 1/4"
> to about 1/2" space. What to do?

Does the vanity stand on the floor or hang from the wall?

--

dadiOH
____________________________

dadiOH's dandies v3.06...
...a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico

Posted by on October 8, 2009, 2:20 pm

The vanity stands on the floor AND also seems to be attached to the
wall.

Time may be a great healer, but it's a lousy beautician.

Posted by dadiOH on October 8, 2009, 3:30 pm

gloria212@webtv.net wrote:

> The vanity stands on the floor AND also seems to be attached to the
> wall.

Then it must be one of two things...

1. What you are referring to is not the vanity itself but a separate piece
standing vertically along the vanity top next to each wall...a splash guard.
Those are attached in various way but regardless of the method they rarely
meet the wall perfectly and any gap between the wall and splash guard is
caulked. It may be that the splash guard has loosened or warped a bit and
there is now insufficient caulk to hide the gap. In this case, the easiest
soultion is to add more caulk although 1/2" is pretty wide to caulk.
Alternatively, remove the splash guard and replace or reinstall...probably
not a DIY job for you.

2. If it is actually the vanity itself that has moved relative to the wall
then the screws/nails holding it in place are not doing their job. Either
that or the wall has moved or the floor has tipped down :)

This probably isn't a DIY job either as the cause of the loosened fastenings
needs to be determined; eg, have the studs within the wall rotted? has
something rotted within the carcase of the vanity?

About the best you could do without really tearing into things is to try
tightening the fastenings or shimming the front edge of the sides of the
cabinet. Even if one or both work, you need to find out *why* the cabinet
has leaned forward.

--

dadiOH
____________________________

dadiOH's dandies v3.06...
...a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico

Posted by David Nebenzahl on October 8, 2009, 4:03 pm

On 10/8/2009 12:30 PM dadiOH spake thus:

Meta-comment: regarding your sig:

dadiOH's dandies v3.06...
...a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico

I have to say that is the very first time I've seen anyone post
information in the form of a Windows help file. Certainly seems like an
odd choice, especially if part of one's audience is Mac users, but
whatever ...

Just curious: I used to use RoboHelp in a previous life as a tech
writer. Is that what you used to create the .hlp? As I remember, it was
a pretty slick little app, and I enjoyed using it, something I can say
about very few pieces of software.

--
Found--the gene that causes belief in genetic determinism

Page 1 of 3 1 2 3 > last >>